New Pivot Kits Are Available For Steering Columns {4310, 4338}
- Articulated Truck:
- 725 (S/N: AFX1-UP; B1L1-UP)
- Off-Highway Truck/Tractor:
- 770 (S/N: BZZ77-UP)
- Quarry Truck:
- 775F (S/N: DLS1-UP)
- 730 (S/N: B1M1-UP)
- 730 EJECTOR (S/N: B1W1-UP)
- 735 (S/N: AWR1-UP; B1N1-UP)
- 740 (S/N: AXM1-UP; B1P1-UP)
- 740 EJECTOR (S/N: AZZ1-UP; B1R1-UP)
- 772 (S/N: RLB279-492,515-UP)
- 773F (S/N: EED1-UP)
- 777F (S/N: JRP1-UP)
New pivot kits are now available to prevent excessive movement of the steering column.
Show/hide table
New Part Number     | Description     | Former Part Number     |
323-3467     | Pivot Kit     | 224-9929     |
321-6951     | Pivot Kit     | 261-2485     |
ReferenceRefer to Special Instruction, REHS4056 for a list of parts and installation procedure for the new components.
The new 323-3467 Pivot Kit has replaced the former 224-9929 Pivot Kit. The new 321-6951 Pivot Kit has replaced the former 261-2485 Pivot Kit. The new pivot kits use steel bushings with grade 8 bolts. Thread sealant will be previously applied to the bolt threads. The new pivot kits also have an increased torque specification.
Caterpillar Information System:
2008/12/22 A New Heater Lines Group is Used {1812, 7304, 7304, 7320}
2008/12/22 An Improved Steering Column Is Now Available {4310, 4338, 4343}
2008/12/22 New Lock Washers Are Used {1150, 1201}
793F and 797F Off-Highway Trucks Braking System Electrical Input Components
C7 Engines for Caterpillar Built Machines Configuration Parameters
C7 Engines for Caterpillar Built Machines Electrical Connectors
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders MID 114 - CID 2260 - FMI 07
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders MID 114 - CID 2260 - FMI 04
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders MID 114 - CID 2260 - FMI 03
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders MID 114 - CID 2260 - FMI 02
3408E and 3412E Engines for the 844 Wheel Dozer and for 988F Series II and 990 Series II Wheel Loaders System Overview
2008/12/15 A New Procedure is Available to Replace the Bearings for the Planetary for the Track Drive on Cold Planers {4050, 4084}
793F and 797F Off-Highway Trucks Braking System Electrical Output Components
2008/12/22 A New Oil Gauge Is Now Used on 950H, 962H, and IT62H Wheel Loaders {1326}
CB54 and CB64 Asphalt Compactors Machine Systems Steering Wheel - Remove and Install
2290 Track Feller Buncher, 2390 Track Feller Buncher, 2391 Track Feller Buncher and 2491 Track Feller Buncher Machine Systems Relief Valve (Line) - Test and Adjust
CB54 and CB64 Asphalt Compactors Machine Systems Spray Bar - Remove and Install
CB54 and CB64 Asphalt Compactors Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
CB54 and CB64 Asphalt Compactors Machine Systems Operator Platform - Remove and Install
CB54 and CB64 Asphalt Compactors Machine Electronic Control System MID 039 - CID 1618 - FMI 04
2590 Track Feller Buncher Machine Systems Relief Valve (Line) - Test and Adjust
2008/12/22 The Implement Pump Pressure Sensor is Now Relocated {1439, 5070}
MT4400D AC Off-Highway Truck Additional Messages
C175-16 Engine for 795F Series AC Off-Highway Trucks Turbocharger Support