Service and Parking Brake (Rear) - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 138-7575     | 连杆支架     | 2     |
B     | 132-8159     | 液压扭矩扳手总成     | 1     |
203-5435 | 堆叠套筒     | 1     | |
132-8177 | 扳手连杆     | 1     | |
132-8223 | 液压泵和马达     | 1     | |
C     | 203-5435     | 堆叠套筒     | 1     |
开始:
- 拆下后轮、轴承和 Duo-Cone 密封件。 请参阅拆解和组装, "后轮、轴承和 Duo-Cone 密封件 - 拆卸"。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
注意 |
---|
不正确组装零件或不遵守现有步骤会损坏零件和组件。 要避免零件损坏,请务必在零件上做识别标记,以便将其安装到原来的位置。 组装过程中,切勿强行安装零件。 |
Show/hide table
注意 |
---|
不遵循建议的步骤或不使用这些步骤所需的指定工具会导致零部件损坏。 要避免零部件损坏,请使用建议的工具并遵循建议的步骤。 |
Show/hide table
在阅读和了解《操作和保养手册》中的说明和警告之前,请勿操作机器。 不遵守这些说明或不注意这些警告会造成人身伤亡。 需要更换手册时请与任何卡特彼勒代理商联系。 正确保养是您的职责。 对于配备快速连接器的机器,作业机具的不正确连接会导致伤亡。 直到有明确迹象表明接头销已完全接合,才可开动机器。 按照《操作和保养手册》建议的程序去做。 牢牢固定住无线电(如有配备)和所有松散的物品,如午餐盒或工具。不这样做会造成物品在机器恶劣操作中或倾翻中变换位置并导致伤害。请参阅操作和保养手册 中关于专门系紧和锁定要求。 |
- 将工具 (A) 连接在行车和停车制动器 (1) 上。 将工具 (A) 连接到适当的起吊设备上。
注: 清洁度是一项重要的因素。 拆卸步骤开始之前,应彻底清洁部件外部。 这有助于防止尘土进入内部结构。
Show/hide table
图 1 | g00773969 |
Show/hide table
图 2 | g00773992 |
- 使用工具 (B) 和工具 (C) 拆下 34 颗螺母 (2) 和垫圈。
注: 工具 (B) 和工具 (C) 未显示。 将工具 (C) 置于靠近工具 (B) 的螺母上,然后用作工具 (B) 的反作用点。
- 使用工具 (A) 和起吊设备拆下行车和停车制动器 (1) 。 行车和停车制动器 (1) 的重量为 1587 kg (3492 lb)。
- 拆下 O 形密封圈 (3) 。
Show/hide table
图 3 | g00774009 |
Caterpillar Information System:
2008/12/08 New Piston Assembly for the Main Hydraulic Pump for 345C Excavators {5070}
416E, 420E and 430E Backhoe Loaders Machine Systems Bank Valve (Loader) - Assemble - Mechanical 2 Bank Valve
795F and 795F Series AC Off-Highway Truck Power Train Truck Body Retaining Cable - Remove and Install
414E, 416E, 420E and 430E Backhoe Loaders Machine Systems Bank Valve (Loader) - Disassemble - Mechanical 2 Bank Valve
2008/10/13 New Procedure for Inspecting the TC900x Radios {733T}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Pilot Valve (Stabilizer) - Assemble
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Pilot Valve (Stabilizer) - Disassemble
MINEGEM Machine Control ; Guidance Products LADAR Desiccant Cartridge - Inspect/Replace - R2900G JLK
MINEGEM Machine Control ; Guidance Products Power Supply Panel Isolation Switch
14M Motor Grader Axles May Generate Fine Copper Filings{4050} 14M Motor Grader Axles May Generate Fine Copper Filings{4050}
Noisy Steering Pilot Valve{4322, 5069, 5117} Noisy Steering Pilot Valve{4322, 5069, 5117}
3408E and 3412E Engines for Caterpillar Built Machines Prelubrication Oil Pump
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Service and Parking Brake (Rear) - Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Service and Parking Brake (Rear) - Disassemble
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Service and Parking Brake (Rear) - Assemble
2008/12/01 A New Clamp Helps Prevent Leaks and Cracks {1000, 1350, 1380}
Procedure to Install the Horn Button{7332, 7402} Procedure to Install the Horn Button{7332, 7402}
24M Motor Grader Implement Electronic Control System MID 082 - CID 2747 - FMI 03
793F and 793F CMD Off-Highway Truck Power Train Engine Support
793F and 793F CMD Off-Highway Truck Power Train Window Wiper
Setup and Configuration for Health Interface Module (HIM) Diagnostic Tool
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bank Valve (Backhoe) - Disassemble - Mechanical 6 Bank, 7 Bank, or 8 Bank Valve
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bank Valve (Backhoe) - Assemble - Mechanical 6 Bank, 7 Bank, or 8 Bank Valve
793F and 793F CMD Off-Highway Truck Power Train Water Lines (Oil Coolers) - If Equipped