Engine Support
Show/hide table
Illustration 1 | g02909036 |
Show/hide table
Specification for 261-2228 Engine Support Gp | |||
Item | Qty | Part | Specification Description |
1 | 6 | 262-4436 Bolt | Torque to |
2 | 8 | 8T-1757 Nut | Torque to |
3 | 4 | 114-6099 Bolt | Torque to |
4 | 4 | 6V-7742 Full Nut | Torque to |
Caterpillar Information System:
24M Motor Grader Implement Electronic Control System MID 082 - CID 2747 - FMI 03
Procedure to Install the Horn Button{7332, 7402} Procedure to Install the Horn Button{7332, 7402}
2008/12/01 A New Clamp Helps Prevent Leaks and Cracks {1000, 1350, 1380}
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Service and Parking Brake (Rear) - Assemble
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Service and Parking Brake (Rear) - Disassemble
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Service and Parking Brake (Rear) - Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Service and Parking Brake (Rear) - Remove
2008/12/08 New Piston Assembly for the Main Hydraulic Pump for 345C Excavators {5070}
416E, 420E and 430E Backhoe Loaders Machine Systems Bank Valve (Loader) - Assemble - Mechanical 2 Bank Valve
795F and 795F Series AC Off-Highway Truck Power Train Truck Body Retaining Cable - Remove and Install
414E, 416E, 420E and 430E Backhoe Loaders Machine Systems Bank Valve (Loader) - Disassemble - Mechanical 2 Bank Valve
2008/10/13 New Procedure for Inspecting the TC900x Radios {733T}
793F and 793F CMD Off-Highway Truck Power Train Window Wiper
Setup and Configuration for Health Interface Module (HIM) Diagnostic Tool
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bank Valve (Backhoe) - Disassemble - Mechanical 6 Bank, 7 Bank, or 8 Bank Valve
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bank Valve (Backhoe) - Assemble - Mechanical 6 Bank, 7 Bank, or 8 Bank Valve
793F and 793F CMD Off-Highway Truck Power Train Water Lines (Oil Coolers) - If Equipped
Bypass Valve Installation for Improved Cold Start{1386, 1387, 1408, 3154, 5057} Bypass Valve Installation for Improved Cold Start{1386, 1387, 1408, 3154, 5057}
793F and 793F CMD Off-Highway Truck Power Train Water Lines (Oil Coolers) - If Equipped
C27 Engine for the AD55B Underground Articulated Truck Electrical Power Supply - Test
Loss of Coolant Flow Events on 793D Mining Trucks{1395, 1438, 7601} Loss of Coolant Flow Events on 793D Mining Trucks{1395, 1438, 7601}
2009/04/13 An Improved Bracket Assembly for Refrigerant Compressor and Mounting Group Is Now Used. {1802}
793F and 793F CMD Off-Highway Truck Power Train Differential and Bevel Gear
Procedure for Eliminating the Interference Between the Step Mounting Bolts and the Door Seal{7254, 7308} Procedure for Eliminating the Interference Between the Step Mounting Bolts and the Door Seal{7254, 7308}