Window Wiper
Show/hide table
Illustration 1 | g03395115 |
Show/hide table
Specification for 276-6129 Window Wiper Gp     | |||
---|---|---|---|
Item     | Qty     | Part     | Specification Description     |
1     | 1     | 3B-4504 Lockwasher     | Tighten to 7 ± 1 N·m (62 ± 9 lb in).     |
2     | 4     | 291-0999 Window Wiper Motor Gp     | Before assembly, apply blue Loctite 243 to the threads.     |
3     | -     | -     | Hold the inner nut while tightening the outer nut.     |
4     | 2     | -     | Tighten the bolt to 14 ± 2 N·m (124 ± 18 lb in).     |
Show/hide table
Illustration 2 | g03395120 |
View A-A |
Show/hide table
Item     | Qty     | Part     | Specification Description     |
C     | -     | -     | The distance of the wiper blade from the edge of the window in the park position is 175.0 ± 3.0 mm (6.89 ± 0.12 inch).     |
D     | -     | -     | The distance of the wiper blade from the edge of the window in the park position is 222.0 ± 3.0 mm (8.74 ± 0.12 inch).     |
E     | -     | -     | Wiping angle from automatic parking position is 42 degrees.     |
F     | -     | -     | Wiping angle from automatic parking position is 71 degrees.     |
5     | -     | -     | Tighten to 2.5 ± 0.5 mm (0.10 ± 0.02 inch).     |
6     | 2     | 8T-5400 Connector As     | Torque to 0.35 ± 0.05 N·m (3.10 ± 0.44 lb in).     |
Caterpillar Information System:
793F and 793F CMD Off-Highway Truck Power Train Engine Support
24M Motor Grader Implement Electronic Control System MID 082 - CID 2747 - FMI 03
Procedure to Install the Horn Button{7332, 7402} Procedure to Install the Horn Button{7332, 7402}
2008/12/01 A New Clamp Helps Prevent Leaks and Cracks {1000, 1350, 1380}
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Service and Parking Brake (Rear) - Assemble
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Service and Parking Brake (Rear) - Disassemble
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Service and Parking Brake (Rear) - Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Service and Parking Brake (Rear) - Remove
2008/12/08 New Piston Assembly for the Main Hydraulic Pump for 345C Excavators {5070}
416E, 420E and 430E Backhoe Loaders Machine Systems Bank Valve (Loader) - Assemble - Mechanical 2 Bank Valve
795F and 795F Series AC Off-Highway Truck Power Train Truck Body Retaining Cable - Remove and Install
414E, 416E, 420E and 430E Backhoe Loaders Machine Systems Bank Valve (Loader) - Disassemble - Mechanical 2 Bank Valve
Setup and Configuration for Health Interface Module (HIM) Diagnostic Tool
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bank Valve (Backhoe) - Disassemble - Mechanical 6 Bank, 7 Bank, or 8 Bank Valve
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bank Valve (Backhoe) - Assemble - Mechanical 6 Bank, 7 Bank, or 8 Bank Valve
793F and 793F CMD Off-Highway Truck Power Train Water Lines (Oil Coolers) - If Equipped
Bypass Valve Installation for Improved Cold Start{1386, 1387, 1408, 3154, 5057} Bypass Valve Installation for Improved Cold Start{1386, 1387, 1408, 3154, 5057}
793F and 793F CMD Off-Highway Truck Power Train Water Lines (Oil Coolers) - If Equipped
C27 Engine for the AD55B Underground Articulated Truck Electrical Power Supply - Test
Loss of Coolant Flow Events on 793D Mining Trucks{1395, 1438, 7601} Loss of Coolant Flow Events on 793D Mining Trucks{1395, 1438, 7601}
2009/04/13 An Improved Bracket Assembly for Refrigerant Compressor and Mounting Group Is Now Used. {1802}
793F and 793F CMD Off-Highway Truck Power Train Differential and Bevel Gear
Procedure for Eliminating the Interference Between the Step Mounting Bolts and the Door Seal{7254, 7308} Procedure for Eliminating the Interference Between the Step Mounting Bolts and the Door Seal{7254, 7308}
2008/12/29 Improved Sealing of the Circuit Breaker Panel is Now Available {1420}