Water Lines (Oil Coolers) - If Equipped
Show/hide table
 | |
| Illustration 1 | g01684795 |
Front view | |
Show/hide table
 | |
| Illustration 2 | g01684797 |
Left side view | |
Show/hide table
 | |
| Illustration 3 | g01684798 |
View A-A | |
(1) The final installation torque for the 26 8T-4986 Hose Clamps ... 12 ± 2 N·m (105 ± 20 lb in)
(2) The final installation torque for the two 8T-4987 Hose Clamps ... 12 ± 2 N·m (105 ± 20 lb in)
Caterpillar Information System:
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bank Valve (Backhoe) - Assemble - Mechanical 6 Bank, 7 Bank, or 8 Bank Valve
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bank Valve (Backhoe) - Disassemble - Mechanical 6 Bank, 7 Bank, or 8 Bank Valve
Setup and Configuration for Health Interface Module (HIM) Diagnostic Tool
793F and 793F CMD Off-Highway Truck Power Train Window Wiper
793F and 793F CMD Off-Highway Truck Power Train Engine Support
24M Motor Grader Implement Electronic Control System MID 082 - CID 2747 - FMI 03
Procedure to Install the Horn Button{7332, 7402} Procedure to Install the Horn Button{7332, 7402}
2008/12/01 A New Clamp Helps Prevent Leaks and Cracks {1000, 1350, 1380}
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Service and Parking Brake (Rear) - Assemble
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Service and Parking Brake (Rear) - Disassemble
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Service and Parking Brake (Rear) - Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Service and Parking Brake (Rear) - Remove
Bypass Valve Installation for Improved Cold Start{1386, 1387, 1408, 3154, 5057} Bypass Valve Installation for Improved Cold Start{1386, 1387, 1408, 3154, 5057}
793F and 793F CMD Off-Highway Truck Power Train Water Lines (Oil Coolers) - If Equipped
C27 Engine for the AD55B Underground Articulated Truck Electrical Power Supply - Test
Loss of Coolant Flow Events on 793D Mining Trucks{1395, 1438, 7601} Loss of Coolant Flow Events on 793D Mining Trucks{1395, 1438, 7601}
2009/04/13 An Improved Bracket Assembly for Refrigerant Compressor and Mounting Group Is Now Used. {1802}
793F and 793F CMD Off-Highway Truck Power Train Differential and Bevel Gear
Procedure for Eliminating the Interference Between the Step Mounting Bolts and the Door Seal{7254, 7308} Procedure for Eliminating the Interference Between the Step Mounting Bolts and the Door Seal{7254, 7308}
2008/12/29 Improved Sealing of the Circuit Breaker Panel is Now Available {1420}
C4.4 Engines for Caterpillar Built Machines System Overview
C4.4 Engines for Caterpillar Built Machines Glossary
C7 Engines for Caterpillar Built Machines Electronic Control Unit
Installation of the AccuGrade® - Grade Control System (CD700) For Motor Graders{7220} Installation of the AccuGrade® - Grade Control System (CD700) For Motor Graders{7220}