2008/10/13 Caterpillar


Shims Are Available for the Extendable Stick on Backhoe Loaders {6533}

Usage:

432E BXE
Backhoe Loader:
422E (S/N: HBE1-UP)
428E (S/N: SNL1-UP)
432E (S/N: BXE1-UP)
434E (S/N: FSH1-UP)
442E (S/N: GKZ1-UP)
444E (S/N: LBE1-UP)

Description of Change: Shims are available for backhoe loaders. The shims will extend the life of the wear pads on the extendable stick.

Adaptable To:




Illustration 1g01682818

287-5667 Shims will need to be added to the 217-1577 Pad Assembly (1) and to 289-9426 Pad Assembly. Refer to Disassembly and Assembly, RENR6485, "414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems". Shims should provide a 1 mm (0.0394 inch) between the wear pads and the sliding surface of the extendable stick. You should not use more than ten shims.

Caterpillar Information System:

422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bank Valve (Backhoe) - Assemble - Pilot Operated
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bank Valve (Backhoe) - Disassemble - Pilot Operated
C27 Engine for the AD55B Underground Articulated Truck Speed/Timing - Test
Checking 140M and 160M Transmission Oil Levels{3030, 3080, 3258} Checking 140M and 160M Transmission Oil Levels{3030, 3080, 3258}
CB54 and CB64 Vibratory Asphalt Compactors Mirror
CB54 and CB64 Vibratory Asphalt Compactors Fuel System Water Separator - Drain
The Steering and Transmission Integrated Controls (STIC) May Not Be Operating Correctly{3033} The Steering and Transmission Integrated Controls (STIC) May Not Be Operating Correctly{3033}
CB54 and CB64 Vibratory Asphalt Compactors Fuel System Secondary Filter - Replace
CB54 and CB64 Vibratory Asphalt Compactors Fuel System Fuel Filter Element - Replace
320D and 323D Excavators Machine System Specifications Grease Lines
C27 Engine for the AD55B Underground Articulated Truck Injector Solenoid - Test
324D and 326D Excavators Machine System Specifications Boom Cylinder Lines
3408E and 3412E Engines for Caterpillar Built Machines Prelubrication Oil Pump
Noisy Steering Pilot Valve{4322, 5069, 5117} Noisy Steering Pilot Valve{4322, 5069, 5117}
14M Motor Grader Axles May Generate Fine Copper Filings{4050} 14M Motor Grader Axles May Generate Fine Copper Filings{4050}
MINEGEM Machine Control ; Guidance Products Power Supply Panel Isolation Switch
MINEGEM Machine Control ; Guidance Products LADAR Desiccant Cartridge - Inspect/Replace - R2900G JLK
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Pilot Valve (Stabilizer) - Disassemble
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Pilot Valve (Stabilizer) - Assemble
2008/10/13 New Procedure for Inspecting the TC900x Radios {733T}
414E, 416E, 420E and 430E Backhoe Loaders Machine Systems Bank Valve (Loader) - Disassemble - Mechanical 2 Bank Valve
795F and 795F Series AC Off-Highway Truck Power Train Truck Body Retaining Cable - Remove and Install
416E, 420E and 430E Backhoe Loaders Machine Systems Bank Valve (Loader) - Assemble - Mechanical 2 Bank Valve
2008/12/08 New Piston Assembly for the Main Hydraulic Pump for 345C Excavators {5070}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.