 |
|
Adjust all mirrors as specified in the Operation and Maintenance Manual. Failure to heed this warning can lead to personal injury or death. |
|
|
Slips and falls can result in personal injury. Use the machines access systems when adjusting the mirrors. If the mirrors cannot be reached using the machine access systems follow the instructions found within the Operation and Maintenance Manual, "Mirror" in order to access the mirrors. |
Note: Your machine may not be equipped with all of the mirrors that are described in this topic.
| |
| Illustration 1 | g01681769 |
|
(1) Right side rear view mirror
(2) Left side rear view mirror (3) Cab mirrors | |
Mirrors provide additional visibility around your machine. Make sure that the mirrors are in proper working condition and that the mirrors are clean. Adjust all mirrors at the beginning of each work period and adjust the mirrors when you change operators.
Modified Machines or machines that have additional equipment or attachments may influence your visibility.
- Park the machine on a level surface.
- Lower the work tool to the ground.
- Stop the engine.
Note: Hand tools may be needed in order to adjust the mirrors. Refer to Specifications, SENR3130, "Torque Specifications" for the recommended torque.
| |
| Illustration 2 | g01681837 |
Adjust the right side rear view mirror (1) so the rear of the machine can be seen. Refer to illustration 2.
| |
| Illustration 3 | g01681852 |
Adjust the left side rear view mirror (2) so the rear of the machine can be seen. Refer to illustration 3.
| |
| Illustration 4 | g01793574 |
Adjust the right side front view mirror (3) so the front of the machine can be seen. Refer to illustration 4.
| |
| Illustration 5 | g01793575 |
Adjust the left side front view mirror (4) so the front of the machine can be seen. Refer to illustration 5.