Tire Inflation with Air
Show/hide table
 |
|
Use a self-attaching inflation chuck and stand behind the tread when inflating a tire. Proper inflation equipment, and training in using the equipment, are necessary to avoid overinflation. A tire blowout or rim failure can result from improper or misused equipment. Before inflating tire, install on the machine or put tire in restraining device. |
Show/hide table
| NOTICE |
|---|
|
Set the tire inflation equipment regulator at no more than |
Inflate front tires to 60 psi and inflate rear tires to 45 psi.
The 450E backhoe should be equipped with rear tires having a load capacity and speed rating equal to or greater than the 21L-24 bias with an 18-ply rating.
Caterpillar Information System:
CP54 and CS54 Vibratory Soil Compactors Machine Systems Flood Lighting
2007/09/10 Improved Seals in the Suspension Cylinders Are Now Used {7201}
Procedure to Correct Straight Line Travel{5057} Procedure to Correct Straight Line Travel{5057}
New Retaining Method Is Available for the Front Axle Mounting Pin and the Rear Axle Mounting Pin{3013} New Retaining Method Is Available for the Front Axle Mounting Pin and the Rear Axle Mounting Pin{3013}
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Cab Liner
CP76 and CS76 Vibratory Compactors Machine Systems Piston Motor (Vibratory)
CP76 and CS76 Vibratory Compactors Machine Systems Magnetic Sensor (Vibratory) - Test and Adjust
CP76 and CS76 Vibratory Compactors Machine Systems Fan Motor Speed (Radiator Cooling) - Test and Adjust
140M Motor Grader Engine Supplement Vibration Damper - Remove and Install
Installation of the Power Shift Solenoid{5264, 5479} Installation of the Power Shift Solenoid{5264, 5479}
CP76 and CS76 Vibratory Compactors Machine Systems Vibratory Frequency - Test and Adjust
160M Motor Grader Machine Systems Wheel Lean Arm and Axle Bushings - Remove
160M Motor Grader Machine Systems Wheel Lean Arm and Axle Bushings - Install
Procedure to Provide Pinion Bearings with Sufficient Oil {3256, 3258} Procedure to Provide Pinion Bearings with Sufficient Oil {3256, 3258}
CP54 and CS54 Vibratory Soil Compactors Machine Systems Heater Lines
CP76 and CS76 Vibratory Compactors Machine Systems Gear Pump Flow (Steering) - Test
CP76 and CS76 Vibratory Compactors Machine Systems Relief Valve (Main, Vibratory) - Test and Adjust
140M Motor Grader Engine Supplement Radiator - Remove
3176C Engine for the R1600G and the R1700G Load Haul Dumps Electrical Power Supply - Test
CP54 and CS54 Vibratory Soil Compactors Machine Systems Air Lines
3176C Engine for the R1600G and the R1700G Load Haul Dumps Speed Control (Switch) - Test
CP76 and CS76 Vibratory Compactors Machine Systems Piston Pump Neutral (Vibratory) - Test and Adjust
Rework Procedure For the 192-0086 Ride Control Valve Gp {5004, 5054} Rework Procedure For the 192-0086 Ride Control Valve Gp {5004, 5054}
CS54 and CP54 Vibratory Soil Compactors Operator Controls