140M Motor Grader Engine Supplement Caterpillar


Vibration Damper - Remove and Install

Usage:

140M B9D

Removal Procedure

Start By:

  1. Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".



    Illustration 1g01374496

  1. Remove bolts (1). Remove panel (2) .



    Illustration 2g01407843

  1. Remove belt (3). Refer to Operation and Maintenance Manual, "Belts - Inspect/Replace".

  1. Remove bolts (5) from crankshaft vibration damper (4). Remove crankshaft vibration damper (4) from the crankshaft pulley.

Installation Procedure




    Illustration 3g01407843

  1. Position crankshaft vibration damper (4) on the crankshaft pulley. Install bolts (5) .

  1. Install belt (3). Refer to Operation and Maintenance Manual, "Belts - Inspect/Replace".



    Illustration 4g01374496

  1. Position panel (2). Install bolts (1) .

End By: Disconnect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".

Caterpillar Information System:

Installation of the Power Shift Solenoid{5264, 5479} Installation of the Power Shift Solenoid{5264, 5479}
CP76 and CS76 Vibratory Compactors Machine Systems Vibratory Frequency - Test and Adjust
160M Motor Grader Machine Systems Wheel Lean Arm and Axle Bushings - Remove
3176C Engine for the R1600G and the R1700G Load Haul Dumps Configuration Parameters
Product Link Registration Problems{733T, 7606} Product Link Registration Problems{733T, 7606}
3176C Engine for the R1600G and the R1700G Load Haul Dumps Electrical Connectors
3176C Engine for the R1600G and the R1700G Load Haul Dumps Diagnostic Capabilities
CB14 Paving Compactor Machine Systems Hydraulic Oil Filter - Remove and Install
CP76 and CS76 Vibratory Compactors Machine Systems Relief Valve (Steering) - Test
CP76 and CS76 Vibratory Compactors Machine Systems Hydraulic Oil Contamination - Test
The Hydraulic Oil Filter for the Steering System and the Hydraulic Fan Loosens on some Large Off-Highway Trucks{4304, 5068} The Hydraulic Oil Filter for the Steering System and the Hydraulic Fan Loosens on some Large Off-Highway Trucks{4304, 5068}
CP76 and CS76 Vibratory Compactors Machine Systems Hydraulic System Pressure - Release
CP76 and CS76 Vibratory Compactors Machine Systems Fan Motor Speed (Radiator Cooling) - Test and Adjust
CP76 and CS76 Vibratory Compactors Machine Systems Magnetic Sensor (Vibratory) - Test and Adjust
CP76 and CS76 Vibratory Compactors Machine Systems Piston Motor (Vibratory)
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Cab Liner
New Retaining Method Is Available for the Front Axle Mounting Pin and the Rear Axle Mounting Pin{3013} New Retaining Method Is Available for the Front Axle Mounting Pin and the Rear Axle Mounting Pin{3013}
Procedure to Correct Straight Line Travel{5057} Procedure to Correct Straight Line Travel{5057}
2007/09/10 Improved Seals in the Suspension Cylinders Are Now Used {7201}
CP54 and CS54 Vibratory Soil Compactors Machine Systems Flood Lighting
450E Backhoe Loader Tire Inflation with Air
160M Motor Grader Machine Systems Wheel Lean Arm and Axle Bushings - Install
Procedure to Provide Pinion Bearings with Sufficient Oil {3256, 3258} Procedure to Provide Pinion Bearings with Sufficient Oil {3256, 3258}
CP54 and CS54 Vibratory Soil Compactors Machine Systems Heater Lines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.