Flood Lighting
Show/hide table
 | |
| Illustration 1 | g01408086 |
(1) Apply 4C-9612 Sealant in order to fill the gap between the two grommets and the wires.
(2) Apply 4C-9612 Sealant between the harness and the cab.
(3) Make a small cut in the two plugs that is large enough for the wires to go through the plug.
(5) Torque for four nuts ... 20 ± 1 N·m (15 ± 1 lb ft)
(6) Torque for four nuts ... 9 ± 1 N·m (80 ± 9 lb in)
Caterpillar Information System:
2007/09/10 Improved Seals in the Suspension Cylinders Are Now Used {7201}
Procedure to Correct Straight Line Travel{5057} Procedure to Correct Straight Line Travel{5057}
New Retaining Method Is Available for the Front Axle Mounting Pin and the Rear Axle Mounting Pin{3013} New Retaining Method Is Available for the Front Axle Mounting Pin and the Rear Axle Mounting Pin{3013}
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Cab Liner
CP76 and CS76 Vibratory Compactors Machine Systems Piston Motor (Vibratory)
CP76 and CS76 Vibratory Compactors Machine Systems Magnetic Sensor (Vibratory) - Test and Adjust
CP76 and CS76 Vibratory Compactors Machine Systems Fan Motor Speed (Radiator Cooling) - Test and Adjust
140M Motor Grader Engine Supplement Vibration Damper - Remove and Install
Installation of the Power Shift Solenoid{5264, 5479} Installation of the Power Shift Solenoid{5264, 5479}
CP76 and CS76 Vibratory Compactors Machine Systems Vibratory Frequency - Test and Adjust
160M Motor Grader Machine Systems Wheel Lean Arm and Axle Bushings - Remove
3176C Engine for the R1600G and the R1700G Load Haul Dumps Configuration Parameters
450E Backhoe Loader Tire Inflation with Air
160M Motor Grader Machine Systems Wheel Lean Arm and Axle Bushings - Install
Procedure to Provide Pinion Bearings with Sufficient Oil {3256, 3258} Procedure to Provide Pinion Bearings with Sufficient Oil {3256, 3258}
CP54 and CS54 Vibratory Soil Compactors Machine Systems Heater Lines
CP76 and CS76 Vibratory Compactors Machine Systems Gear Pump Flow (Steering) - Test
CP76 and CS76 Vibratory Compactors Machine Systems Relief Valve (Main, Vibratory) - Test and Adjust
140M Motor Grader Engine Supplement Radiator - Remove
3176C Engine for the R1600G and the R1700G Load Haul Dumps Electrical Power Supply - Test
CP54 and CS54 Vibratory Soil Compactors Machine Systems Air Lines
3176C Engine for the R1600G and the R1700G Load Haul Dumps Speed Control (Switch) - Test
CP76 and CS76 Vibratory Compactors Machine Systems Piston Pump Neutral (Vibratory) - Test and Adjust
Rework Procedure For the 192-0086 Ride Control Valve Gp {5004, 5054} Rework Procedure For the 192-0086 Ride Control Valve Gp {5004, 5054}