CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Caterpillar


Cab Liner

Usage:

CP-56 C5P


Illustration 1g01407905

(1) Apply sealant to the threads of the bolts and screws before installation.



Illustration 2g01407907
Section B-B

(2) Torque for three screws ... 4.5 ± 0.5 N·m (40 ± 4 lb in)

(3) Torque for three screws ... 6 ± 1 N·m (55 ± 9 lb in)

(4) Torque for two nuts ... 3.5 ± 0.5 N·m (30 ± 4 lb in)

(5) Torque for two bolts ... 15 ± 3 N·m (135 ± 27 lb in)

Caterpillar Information System:

CP76 and CS76 Vibratory Compactors Machine Systems Piston Motor (Vibratory)
CP76 and CS76 Vibratory Compactors Machine Systems Magnetic Sensor (Vibratory) - Test and Adjust
CP76 and CS76 Vibratory Compactors Machine Systems Fan Motor Speed (Radiator Cooling) - Test and Adjust
140M Motor Grader Engine Supplement Vibration Damper - Remove and Install
Installation of the Power Shift Solenoid{5264, 5479} Installation of the Power Shift Solenoid{5264, 5479}
CP76 and CS76 Vibratory Compactors Machine Systems Vibratory Frequency - Test and Adjust
160M Motor Grader Machine Systems Wheel Lean Arm and Axle Bushings - Remove
3176C Engine for the R1600G and the R1700G Load Haul Dumps Configuration Parameters
Product Link Registration Problems{733T, 7606} Product Link Registration Problems{733T, 7606}
3176C Engine for the R1600G and the R1700G Load Haul Dumps Electrical Connectors
3176C Engine for the R1600G and the R1700G Load Haul Dumps Diagnostic Capabilities
CB14 Paving Compactor Machine Systems Hydraulic Oil Filter - Remove and Install
New Retaining Method Is Available for the Front Axle Mounting Pin and the Rear Axle Mounting Pin{3013} New Retaining Method Is Available for the Front Axle Mounting Pin and the Rear Axle Mounting Pin{3013}
Procedure to Correct Straight Line Travel{5057} Procedure to Correct Straight Line Travel{5057}
2007/09/10 Improved Seals in the Suspension Cylinders Are Now Used {7201}
CP54 and CS54 Vibratory Soil Compactors Machine Systems Flood Lighting
450E Backhoe Loader Tire Inflation with Air
160M Motor Grader Machine Systems Wheel Lean Arm and Axle Bushings - Install
Procedure to Provide Pinion Bearings with Sufficient Oil {3256, 3258} Procedure to Provide Pinion Bearings with Sufficient Oil {3256, 3258}
CP54 and CS54 Vibratory Soil Compactors Machine Systems Heater Lines
CP76 and CS76 Vibratory Compactors Machine Systems Gear Pump Flow (Steering) - Test
CP76 and CS76 Vibratory Compactors Machine Systems Relief Valve (Main, Vibratory) - Test and Adjust
140M Motor Grader Engine Supplement Radiator - Remove
3176C Engine for the R1600G and the R1700G Load Haul Dumps Electrical Power Supply - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.