Improved Seals in the Suspension Cylinders Are Now Used {7201}
- Articulated Truck:
- 725 (S/N: B1L1-UP; AFX1001-UP)
- 730 (S/N: AGF934-UP; B1M1-UP)
- 730 EJECTOR (S/N: B1W1-UP)
- 735 (S/N: B1N1-UP; AWR589-UP)
- 740 (S/N: AXM1183-UP; B1P1-UP)
- 740 EJECTOR (S/N: B1R1-UP; AZZ328-UP)
Description of Change: Improved seals in the suspension cylinders are now used. A new buffer seal, a new U-cup seal, and a new wiper seal are now used in order to improve the service life of the suspension cylinders on 700 Series Articulated Trucks. The new seals have better resistance to heat than the former seals.
Adaptable To: The new parts replace the former parts that are listed in Table 1. These new parts are part of the 200-4300 Suspension Cylinder Gp and the 228-2758 Suspension Cylinder Gp.
Show/hide table
Required Parts     | ||
New Pt. No.     | Description     | Former Pt. No.     |
295-1317     | Buffer Seal As     | 167-2220     |
295-1316     | U-Cup Seal     | 167-2336     |
295-1315     | Wiper Seal     | 225-3289     |
- 725 (S/N: B1L1748-UP)
- 730 (S/N: B1M1670-UP)
- 730 EJECTOR (S/N: B1W296-UP)
- 735 (S/N: B1N985-UP)
- 740 (S/N: B1P2802-UP)
- 740 EJECTOR (S/N: B1R367-UP)
Caterpillar Information System:
Procedure to Correct Straight Line Travel{5057} Procedure to Correct Straight Line Travel{5057}
New Retaining Method Is Available for the Front Axle Mounting Pin and the Rear Axle Mounting Pin{3013} New Retaining Method Is Available for the Front Axle Mounting Pin and the Rear Axle Mounting Pin{3013}
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Cab Liner
CP76 and CS76 Vibratory Compactors Machine Systems Piston Motor (Vibratory)
CP76 and CS76 Vibratory Compactors Machine Systems Magnetic Sensor (Vibratory) - Test and Adjust
CP76 and CS76 Vibratory Compactors Machine Systems Fan Motor Speed (Radiator Cooling) - Test and Adjust
140M Motor Grader Engine Supplement Vibration Damper - Remove and Install
Installation of the Power Shift Solenoid{5264, 5479} Installation of the Power Shift Solenoid{5264, 5479}
CP76 and CS76 Vibratory Compactors Machine Systems Vibratory Frequency - Test and Adjust
160M Motor Grader Machine Systems Wheel Lean Arm and Axle Bushings - Remove
3176C Engine for the R1600G and the R1700G Load Haul Dumps Configuration Parameters
Product Link Registration Problems{733T, 7606} Product Link Registration Problems{733T, 7606}
CP54 and CS54 Vibratory Soil Compactors Machine Systems Flood Lighting
450E Backhoe Loader Tire Inflation with Air
160M Motor Grader Machine Systems Wheel Lean Arm and Axle Bushings - Install
Procedure to Provide Pinion Bearings with Sufficient Oil {3256, 3258} Procedure to Provide Pinion Bearings with Sufficient Oil {3256, 3258}
CP54 and CS54 Vibratory Soil Compactors Machine Systems Heater Lines
CP76 and CS76 Vibratory Compactors Machine Systems Gear Pump Flow (Steering) - Test
CP76 and CS76 Vibratory Compactors Machine Systems Relief Valve (Main, Vibratory) - Test and Adjust
140M Motor Grader Engine Supplement Radiator - Remove
3176C Engine for the R1600G and the R1700G Load Haul Dumps Electrical Power Supply - Test
CP54 and CS54 Vibratory Soil Compactors Machine Systems Air Lines
3176C Engine for the R1600G and the R1700G Load Haul Dumps Speed Control (Switch) - Test
CP76 and CS76 Vibratory Compactors Machine Systems Piston Pump Neutral (Vibratory) - Test and Adjust