160M Motor Grader Machine Systems Caterpillar


Secondary Steering Pump and Motor - Install

Usage:

160M B9E

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
311-1362  Vacuum Cap 


    Illustration 1g01404605

  1. Use two people in order to install secondary steering pump and motor (7). The weight of secondary steering pump and motor (7) is approximately 27 kg (60 lb). Install clamps (6). Connect hose assemblies (5). Connect cable assembly (4). Connect cable assembly (3).


    Illustration 2g01404590

  2. Position cover (2) and install bolts (1).

  3. Turn the battery disconnect switch to the ON position. Refer to Operation and Maintenance Manual, "Battery Disconnect Switch".


    Illustration 3g01397769

  4. Remove Tooling (A).

End By:

  1. Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".

Caterpillar Information System:

160M Motor Grader Machine Systems Secondary Steering Pump and Motor - Remove
2007/08/20 Improved Sealing for Torque Limiter on Hydraulic Pump {5070}
160M Motor Grader Machine Systems Control Manifold (Steering Backup) - Install
160M Motor Grader Machine Systems Control Manifold (Steering Backup) - Remove
854K Wheel Dozer Camera - Clean - If Equipped
C7 Engines for Caterpillar Built Machines Engine Oil Filter Base
160M Motor Grader Machine Systems Steering Control Valve - Install
2007/08/20 New Routing of Hoses on the Extendable Stick Bucket Improves Service Life {5057, 6533}
770 and 772 Off-Highway Truck/Tractors Hydraulic Tank (Hoist, Brake) - Install
770 and 772 Off-Highway Truck/Tractors Hydraulic Tank (Hoist, Brake) - Remove
24M Motor Grader Power Train Drive Chain
160M Motor Grader Machine Systems Steering Control Valve - Remove
770 and 772 Off-Highway Truck/Tractors Cab - Remove
770 and 772 Off-Highway Truck/Tractors Cab - Install
CP54 and CS54 Vibratory Soil Compactors Machine Systems Front Bumper
2007/08/27 Improved Engine Software is Used {7620}
2007/08/13 The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
C7 and C9 Engines for Caterpillar Built Machines CID 0164 FMI 11 Injector Actuation Pressure system fault
2007/08/27 A New Battery Disconnect Switch Improves Battery Life {1402, 1411, 7257}
2007/08/20 The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
14L Motor Grader Steering Frame Lock - Separate and Connect
Fuel Sender Leaks on C-Series Multi Terrain Loaders and Skid Steer Loaders{1273} Fuel Sender Leaks on C-Series Multi Terrain Loaders and Skid Steer Loaders{1273}
CP54 and CS54 Vibratory Soil Compactors Machine Systems Air Conditioner Group
CP76 and CS76 Vibratory Soil Compactors Machine Systems Drum - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.