Steering Control Valve - Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 311-1362 | Vacuum Cap | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position steering control valve (11). Install bolts (10).
Show/hide table
Illustration 2 g01404306 - Install tube assemblies (9), (8), (7), and (6).
Show/hide table
Illustration 3 g01404279 - Connect tube assembly (4).
- Connect hose assembly (5).
- Connect tube assemblies (3).
Show/hide table
Illustration 4 g01404275 - Position cover (2).
- Install bolts (1). Repeat this step for the opposite side of the machine.
Show/hide table
Illustration 5 g01397769 - Remove Tooling (A).
- Release the parking brake.
Show/hide table
Illustration 1 | g01404332 |
End By:
- Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
2007/08/20 New Routing of Hoses on the Extendable Stick Bucket Improves Service Life {5057, 6533}
770 and 772 Off-Highway Truck/Tractors Hydraulic Tank (Hoist, Brake) - Install
770 and 772 Off-Highway Truck/Tractors Hydraulic Tank (Hoist, Brake) - Remove
24M Motor Grader Power Train Drive Chain
160M Motor Grader Machine Systems Steering Control Valve - Remove
Universal Joints and Drive Shafts {3108, 3251, 3253} Universal Joints and Drive Shafts {3108, 3251, 3253}
Reusability of Tapered Bearings {7000, 7551} Reusability of Tapered Bearings {7000, 7551}
770 and 772 Off-Highway Truck/Tractors Slack Adjuster (Rear) - Install
770 and 772 Off-Highway Truck/Tractors Slack Adjuster (Rear) - Remove
3176C Engine for Caterpillar Built Machines Alternator Problem - Charging Problem and/or Noisy Operation
14L Motor Grader Machine Systems Solenoid Valve and Manifold (Hydraulic Fan) - Remove and Install
3412E Engine for Caterpillar Built Machines Acceleration Is Poor or Throttle Response Is Poor
C7 Engines for Caterpillar Built Machines Engine Oil Filter Base
854K Wheel Dozer Camera - Clean - If Equipped
160M Motor Grader Machine Systems Control Manifold (Steering Backup) - Remove
160M Motor Grader Machine Systems Control Manifold (Steering Backup) - Install
2007/08/20 Improved Sealing for Torque Limiter on Hydraulic Pump {5070}
160M Motor Grader Machine Systems Secondary Steering Pump and Motor - Remove
160M Motor Grader Machine Systems Secondary Steering Pump and Motor - Install
770 and 772 Off-Highway Truck/Tractors Cab - Remove
770 and 772 Off-Highway Truck/Tractors Cab - Install
CP54 and CS54 Vibratory Soil Compactors Machine Systems Front Bumper
2007/08/27 Improved Engine Software is Used {7620}
2007/08/13 The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}