Control Manifold (Steering Backup) - Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 311-1362 | Vacuum Cap | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position control manifold (6) and install bolts (3).
- Connect tube assemblies (5).
- Connect harness assemblies (4).
Show/hide table
Illustration 2 g01404523 - Position cover (1).
- Install bolts (2). Repeat this step for the opposite side of the machine.
Show/hide table
Illustration 3 g01397769 - Remove Tooling (A).
Show/hide table
Illustration 1 | g01404536 |
End By:
- Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Test the steering backup control manifold. Refer to Testing and Adjusting, "Control Manifold (Steering Backup) - Test".
Caterpillar Information System:
160M Motor Grader Machine Systems Control Manifold (Steering Backup) - Remove
854K Wheel Dozer Camera - Clean - If Equipped
C7 Engines for Caterpillar Built Machines Engine Oil Filter Base
160M Motor Grader Machine Systems Steering Control Valve - Install
2007/08/20 New Routing of Hoses on the Extendable Stick Bucket Improves Service Life {5057, 6533}
770 and 772 Off-Highway Truck/Tractors Hydraulic Tank (Hoist, Brake) - Install
770 and 772 Off-Highway Truck/Tractors Hydraulic Tank (Hoist, Brake) - Remove
24M Motor Grader Power Train Drive Chain
160M Motor Grader Machine Systems Steering Control Valve - Remove
Universal Joints and Drive Shafts {3108, 3251, 3253} Universal Joints and Drive Shafts {3108, 3251, 3253}
Reusability of Tapered Bearings {7000, 7551} Reusability of Tapered Bearings {7000, 7551}
770 and 772 Off-Highway Truck/Tractors Slack Adjuster (Rear) - Install
2007/08/20 Improved Sealing for Torque Limiter on Hydraulic Pump {5070}
160M Motor Grader Machine Systems Secondary Steering Pump and Motor - Remove
160M Motor Grader Machine Systems Secondary Steering Pump and Motor - Install
770 and 772 Off-Highway Truck/Tractors Cab - Remove
770 and 772 Off-Highway Truck/Tractors Cab - Install
CP54 and CS54 Vibratory Soil Compactors Machine Systems Front Bumper
2007/08/27 Improved Engine Software is Used {7620}
2007/08/13 The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
C7 and C9 Engines for Caterpillar Built Machines CID 0164 FMI 11 Injector Actuation Pressure system fault
2007/08/27 A New Battery Disconnect Switch Improves Battery Life {1402, 1411, 7257}
2007/08/20 The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
14L Motor Grader Steering Frame Lock - Separate and Connect