A New Battery Disconnect Switch Improves Battery Life {1402, 1411, 7257}
- Backhoe Loader:
- 416E (S/N: SHA1-UP)
- 420E (S/N: HLS1-UP; KMW1-UP)
- 430E (S/N: DDT1-UP; EAT1-UP)
Description of Change: A new battery disconnect switch is now factory installed on the E-series backhoe loaders. The new battery disconnect switch will prevent excessive battery discharge when the disconnect switch is activated.
Adaptable To: The new battery disconnect switch is adaptable to the machines that are listed in Table 1. Refer to Table 3 for the parts that are necessary for the retrofitting of the new disconnect switch.
Show/hide table
Sales Model     | Serial Number     |
416E     | S/N:SHA1-2830     |
420E     | S/N:HLS1-4548     |
420E     | S/N:KMW1-1759     |
430E     | S/N:DDT1-595     |
430E     | S/N:EAT1-951     |
Show/hide table
Sales Model     | Serial Number     |
416E     | S/N:SHA2831-UP     |
420E     | S/N:HLS4549-UP     |
420E     | S/N:KMW1760-UP     |
430E     | S/N:DDT596-UP     |
420E     | S/N:EAT952-UP     |
Show/hide table
Quantity     | Part Number     | Description     |
1     | 253-0783     | Battery Box     |
1     | 295-8472     | Bracket As     |
3     | 8T-4189     | Bolt     |
3     | 8T-4224     | Hard Washer     |
1     | 3E-8320     | Instruction Plate     |
1     | 7N-0718     | Disconnect Switch     |
1     | 290-6791     | Cable As     |
1     | 290-6792     | Cable As     |
20cm     | 3E-8299     | Seal     |
Show/hide table
Illustration 1 | g01409563 |
(A) Vents on battery box (B) Battery disconnect switch |
Note: The improved battery box now has vents and is required for the retrofit of the battery disconnect switch. Refer to Illustration 1.
Caterpillar Information System:
C7 and C9 Engines for Caterpillar Built Machines CID 0164 FMI 11 Injector Actuation Pressure system fault
2007/08/13 The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
2007/08/27 Improved Engine Software is Used {7620}
CP54 and CS54 Vibratory Soil Compactors Machine Systems Front Bumper
770 and 772 Off-Highway Truck/Tractors Cab - Install
770 and 772 Off-Highway Truck/Tractors Cab - Remove
160M Motor Grader Machine Systems Secondary Steering Pump and Motor - Install
160M Motor Grader Machine Systems Secondary Steering Pump and Motor - Remove
2007/08/20 Improved Sealing for Torque Limiter on Hydraulic Pump {5070}
160M Motor Grader Machine Systems Control Manifold (Steering Backup) - Install
160M Motor Grader Machine Systems Control Manifold (Steering Backup) - Remove
854K Wheel Dozer Camera - Clean - If Equipped
2007/08/20 The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
14L Motor Grader Steering Frame Lock - Separate and Connect
Fuel Sender Leaks on C-Series Multi Terrain Loaders and Skid Steer Loaders{1273} Fuel Sender Leaks on C-Series Multi Terrain Loaders and Skid Steer Loaders{1273}
CP54 and CS54 Vibratory Soil Compactors Machine Systems Air Conditioner Group
CP76 and CS76 Vibratory Soil Compactors Machine Systems Drum - Install
14L Motor Grader Gear Group (All Wheel Drive) - Remove
2007/08/27 An Improved Secondary Steering Valve Mount is Now Used {4339}
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Design
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injection Lines
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injection Pump
PF-300B and PS-300B Pneumatic Compactors Maintenance Interval Schedule
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injection Nozzles