14L Motor Grader Caterpillar


Steering Frame Lock - Separate and Connect

Usage:

14L B94

Connection Procedure

------ WARNING! ------

No clearance for person in this area when machine turns. Severe injury or death from crushing could occur.


Note: The steering frame lock prevents the machine from articulating.

Note: Install the frame lock pin in the LOCKED position before you perform any of the following operations:

  • Lift the machine.

  • Transport the machine.

  • Perform any work near the center of the machine.


    Illustration 1g01404643

  1. Pull back spring rod (3) in order to remove frame lock pin (1) from storage bracket (4).

  2. Pull back spring rod (2) and install frame lock pin (1) into the LOCKED position. Secure frame lock pin (1) in the LOCKED position with spring rod (2).

Separation Procedure

------ WARNING! ------

No clearance for person in this area when machine turns. Severe injury or death from crushing could occur.




    Illustration 2g01404643

  1. Pull back spring rod (2) in order to remove frame lock pin (1) from the LOCKED position.

  2. Pull back spring rod (3) and install frame lock pin (1) into storage bracket (4). Secure frame lock pin (1) in storage bracket (4) with spring rod (3).

Caterpillar Information System:

2007/08/20 The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
2007/08/27 A New Battery Disconnect Switch Improves Battery Life {1402, 1411, 7257}
C7 and C9 Engines for Caterpillar Built Machines CID 0164 FMI 11 Injector Actuation Pressure system fault
2007/08/13 The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
2007/08/27 Improved Engine Software is Used {7620}
CP54 and CS54 Vibratory Soil Compactors Machine Systems Front Bumper
770 and 772 Off-Highway Truck/Tractors Cab - Install
770 and 772 Off-Highway Truck/Tractors Cab - Remove
160M Motor Grader Machine Systems Secondary Steering Pump and Motor - Install
160M Motor Grader Machine Systems Secondary Steering Pump and Motor - Remove
2007/08/20 Improved Sealing for Torque Limiter on Hydraulic Pump {5070}
160M Motor Grader Machine Systems Control Manifold (Steering Backup) - Install
Fuel Sender Leaks on C-Series Multi Terrain Loaders and Skid Steer Loaders{1273} Fuel Sender Leaks on C-Series Multi Terrain Loaders and Skid Steer Loaders{1273}
CP54 and CS54 Vibratory Soil Compactors Machine Systems Air Conditioner Group
CP76 and CS76 Vibratory Soil Compactors Machine Systems Drum - Install
14L Motor Grader Gear Group (All Wheel Drive) - Remove
2007/08/27 An Improved Secondary Steering Valve Mount is Now Used {4339}
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Design
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injection Lines
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injection Pump
PF-300B and PS-300B Pneumatic Compactors Maintenance Interval Schedule
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injection Nozzles
C1.5 and C2.2 Engines for Caterpillar Built Machines Lifter Group
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Design
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.