Engine Oil Filter Base
整体式壳体
Show/hide table
图 1 | g01156510 |
两件式壳体
Show/hide table
图 2 | g01156511 |
(1) 242-3864 弹簧
- 在试验力下的长度 ... 43.18 mm (1.700
in)
- 试验力 ... 43.7 N (9.8 lb)
- 试验后的自由长度 ... 58.50 ± 0.50 mm (2.303 ± 0.020 in)
- 外径 ... 11 mm (0.4 in)
- 试验力 ... 43.7 N (9.8 lb)
(2) 油滤清器旁通阀的打开压力 ... 135 ± 15 kPa (20 ± 2 psi)
(3) 空心螺柱
- 将空心螺柱装入机油滤清器底座前,将 154-9731 螺纹锁固胶 涂抹到空心螺柱锥形端的一定长度上。 ... 7.5 ± 1.5 mm (0.30
± 0.06 in)
- 空心螺柱的扭矩 ... 68 ± 7 N·m (50 ± 5 lb ft)
(4) 利用洁净的机油润滑机油滤清器密封。 拧紧滤清器,直到密封件与底座接触。 用手将滤清器额外拧紧 3/4 圈(270 度)。
Show/hide table
图 3 | g01449120 |
注: 使用在插图 3 中显示的拧紧次序以拧紧油滤清器底座组件:
- 拧紧螺栓至扭矩为 28 ± 7 N·m (21 ± 5 lb ft)。
- 将螺栓重新上紧到 28 ± 7 N·m (21 ± 5 lb ft) 的扭矩。
Show/hide table
图 4 | g01584495 |
右视图 |
(1) 四个软管端部的扭矩 ... 135 ± 15 N·m (100 ± 11 lb ft)
(2) 锁紧螺母的扭矩 ... 150 ± 20 N·m (110 ± 15 lb ft)
Show/hide table
图 5 | g01584555 |
剖面 A-A |
(3) 利用所密封的润滑剂轻轻润滑 O 形密封圈孔。
Caterpillar Information System:
160M Motor Grader Machine Systems Steering Control Valve - Install
2007/08/20 New Routing of Hoses on the Extendable Stick Bucket Improves Service Life {5057, 6533}
770 and 772 Off-Highway Truck/Tractors Hydraulic Tank (Hoist, Brake) - Install
770 and 772 Off-Highway Truck/Tractors Hydraulic Tank (Hoist, Brake) - Remove
24M Motor Grader Power Train Drive Chain
160M Motor Grader Machine Systems Steering Control Valve - Remove
Universal Joints and Drive Shafts {3108, 3251, 3253} Universal Joints and Drive Shafts {3108, 3251, 3253}
Reusability of Tapered Bearings {7000, 7551} Reusability of Tapered Bearings {7000, 7551}
770 and 772 Off-Highway Truck/Tractors Slack Adjuster (Rear) - Install
770 and 772 Off-Highway Truck/Tractors Slack Adjuster (Rear) - Remove
3176C Engine for Caterpillar Built Machines Alternator Problem - Charging Problem and/or Noisy Operation
14L Motor Grader Machine Systems Solenoid Valve and Manifold (Hydraulic Fan) - Remove and Install
854K Wheel Dozer Camera - Clean - If Equipped
160M Motor Grader Machine Systems Control Manifold (Steering Backup) - Remove
160M Motor Grader Machine Systems Control Manifold (Steering Backup) - Install
2007/08/20 Improved Sealing for Torque Limiter on Hydraulic Pump {5070}
160M Motor Grader Machine Systems Secondary Steering Pump and Motor - Remove
160M Motor Grader Machine Systems Secondary Steering Pump and Motor - Install
770 and 772 Off-Highway Truck/Tractors Cab - Remove
770 and 772 Off-Highway Truck/Tractors Cab - Install
CP54 and CS54 Vibratory Soil Compactors Machine Systems Front Bumper
2007/08/27 Improved Engine Software is Used {7620}
2007/08/13 The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
C7 and C9 Engines for Caterpillar Built Machines CID 0164 FMI 11 Injector Actuation Pressure system fault