- Backhoe Loader:
- 416D (S/N: BFP1-15799)
- 420D (S/N: BLN1-12858; FDP1-25075)
- 430D (S/N: BNK1-6991; BML1-5346)
The routing of the 5P-1505 Hose for the crankcase breather in the 239-5760 Breather Gp has changed. The new route prevents the hose from rubbing against the alternator bracket. Material from the top of the hose has also been removed.
 | |
| Illustration 1 | g01202846 |
In order to correctly route the 5P-1505 Hose (2), look at the 6D-4246 Clip (1) that holds the hose. If the round part of the clip points toward the alternator (5), you must reverse the clip.
Remove the 6D-4246 Clip (1) from the engine. Remove the hose from the clip. Rotate the clip so that the round part of the clip points away from the alternator (5). This will allow additional clearance between the hose and the alternator. Place the hose in the clip. Use the proper torque in order to tighten the clip to the engine.
Locate the end of the 5P-1505 Hose (2) that connects to the crankcase breather (3). Loosen the 8T-9402 Hose Clamp (4). Remove the hose from the crankcase breather. Cut a 110 mm (4.3 inch) length of material from the end of the hose. Place the hose and clamp on the crankcase breather. Tighten the hose clamp to the proper torque.
The new route of the 5P-1505 Hose became effective in production with the following machines: (S/N: BFP15800-UP), (S/N: FDP25076-UP), (S/N: BLN12859-UP), (S/N: BNK6992-UP) and (S/N: BML5347-UP)