PS-150C Pneumatic Compactor Machine System Caterpillar


Oscillating and Steering Bar

Usage:

PS-150C FPS


Illustration 1g01058069

(1) Apply 7M-7456 Bearing Mount Compound to the bearing

(2) Shim both sides equally in order to get a maximum of 1.5 mm (0.0591 inch) gap

(3) Torque for the nut ... 100 ± 10 N·m (74 ± 7 lb ft)

(4) Shim both sides in order to get a maximum of 1.935 mm (0.0762 inch) gap

Caterpillar Information System:

CB-334E and CB-335E Vibratory Compactors Machine Systems Hydraulic Cylinder (Steering)
PS-150C Pneumatic Compactor Machine System Steering Control
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Work Tool Linkage
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Water Spray Pump Flow - Test
267B, 277B and 287B Multi Terrain Loaders Power Train Piston Pump (Hydrostatic) - Install - 287B Multi Terrain Loader
120H and 135H Motor Graders Air System and Brakes Check Valve (Air Tank)
3408E and 3412E Engines for Caterpillar Built Machines CID 0164 FMI 04 Injector Actuation Pressure voltage low
AP-655C and BG-2255C Asphalt Pavers Machine Systems Control Valve (Hydraulic Generator) - Assemble - AYP1-Up and B9G1-Up
AP-655C and BG-2255C Asphalt Pavers Machine Systems Control Valve (Hydraulic Generator) - Disassemble - AYP1-Up and B9G1-Up
CB-334E and CB-335E Vibratory Compactors Machine Systems Water Spray System Troubleshooting
HF181, HF201, HF202, HF221 and HF222 Felling Heads Felling Head Accumulator Arm - Install - HF221 and HF222
HF181, HF201, HF202, HF221 and HF222 Felling Heads Felling Head Accumulator Arm - Assemble - HF221 and HF222
AP-655C and BG-2255C Asphalt Pavers Machine Systems Feeder Drive Shaft Group - Remove
AP555E and BG555E Asphalt Pavers Machine Systems Feeder Drive Shaft Group - Disassemble
AP500F Asphalt Paver Machine Systems Feeder Drive Shaft Group - Assemble
AP-655C and BG-2255C Asphalt Pavers Machine Systems Feeder Drive Shaft Group - Install
AP555E and BG555E Asphalt Pavers Machine Systems Plates (Drag Pans) - Remove and Install
267B, 277B and 287B Multi Terrain Loaders Power Train Track Tensioner - Remove and Install - 287B Multi Terrain Loader
2004/03/22 An Unknown Diagnostic Fault Code is Displayed on the CAT Electronic Service Tool Display {1901}
R1600G Load Haul Dump Power Train Visual Inspection
CB-334E and CB-335E Vibratory Compactors Machine Systems Fan Hydraulic System
247B and 257B Multi Terrain Loaders Machine Systems Work Tool Hydraulic System
PS-150C Pneumatic Compactor Machine System Water Tank
2004/03/22 Special Instruction, REHS2081 , "Rework Procedure for Relocating The Existing Air Conditioner Condenser" is Available {1805}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.