Feeder Drive Shaft Group - Remove
Start By:
- Remove the drag conveyor. Refer to Disassembly and Assembly, "Drag Conveyor - Remove and Install".
- Remove the wheel (final drive). Refer to Disassembly and Assembly, "Wheel (Final Drive) - Remove and Install".
- Remove covers (1) and (2).
Show/hide table
Illustration 2 g01068798 - Loosen bolts (4). Turn bolts (3) counterclockwise in order to relieve the tension on the chain.
Show/hide table
Illustration 3 g01070226 - Remove bolts (6) and plate assembly (5).
Show/hide table
Illustration 4 g01070227 - Remove bolts (7). Use a suitable lifting device in order to remove plate (8) from the machine. The weight of the plate is approximately
23 kg (51 lb) .Show/hide tableIllustration 5 g01070228 - Disconnect tube assembly (9) from the shaft assembly.
Show/hide table
Illustration 6 g01070229 - Loosen bolts (10). Do not remove bolts (10) at this time.
Show/hide table
Illustration 7 g01070389 - Remove bolts (11) and cap (12).
Show/hide table
Illustration 8 g01070393 Show/hide tableIllustration 9 g01070394 - Remove bolts (14).
- Loosen setscrews (16).
- Use a suitable pry bar in order to force shaft assembly (19) toward the center of the machine, as shown. Moving the shaft assembly toward the center of the machine is necessary in order to remove sprocket (15) from the shaft.
- Remove sprocket (15) from chain (18) and the shaft.
- Remove key (17) from the shaft.
- Disconnect hose assembly (13) from the shaft assembly.
Show/hide table
Illustration 10 g01070395 - Use a suitable lifting device in order to support shaft assembly (19), as shown. Remove bolts (10) and remove shaft assembly (19) from the machine. The weight of the shaft assembly is approximately
55 kg (121 lb) .
Show/hide table
Illustration 1 | g01068786 |
Caterpillar Information System:
PS-150C Pneumatic Compactor Machine System Oscillating and Steering Bar
CB-334E and CB-335E Vibratory Compactors Machine Systems Hydraulic Cylinder (Steering)
PS-150C Pneumatic Compactor Machine System Steering Control
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Work Tool Linkage
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Water Spray Pump Flow - Test
267B, 277B and 287B Multi Terrain Loaders Power Train Piston Pump (Hydrostatic) - Install - 287B Multi Terrain Loader
120H and 135H Motor Graders Air System and Brakes Check Valve (Air Tank)
3408E and 3412E Engines for Caterpillar Built Machines CID 0164 FMI 04 Injector Actuation Pressure voltage low
AP-655C and BG-2255C Asphalt Pavers Machine Systems Control Valve (Hydraulic Generator) - Assemble - AYP1-Up and B9G1-Up
AP-655C and BG-2255C Asphalt Pavers Machine Systems Control Valve (Hydraulic Generator) - Disassemble - AYP1-Up and B9G1-Up
CB-334E and CB-335E Vibratory Compactors Machine Systems Water Spray System Troubleshooting
HF181, HF201, HF202, HF221 and HF222 Felling Heads Felling Head Accumulator Arm - Install - HF221 and HF222
AP555E and BG555E Asphalt Pavers Machine Systems Feeder Drive Shaft Group - Disassemble
AP500F Asphalt Paver Machine Systems Feeder Drive Shaft Group - Assemble
AP-655C and BG-2255C Asphalt Pavers Machine Systems Feeder Drive Shaft Group - Install
AP555E and BG555E Asphalt Pavers Machine Systems Plates (Drag Pans) - Remove and Install
267B, 277B and 287B Multi Terrain Loaders Power Train Track Tensioner - Remove and Install - 287B Multi Terrain Loader
2004/03/22 An Unknown Diagnostic Fault Code is Displayed on the CAT Electronic Service Tool Display {1901}
R1600G Load Haul Dump Power Train Visual Inspection
CB-334E and CB-335E Vibratory Compactors Machine Systems Fan Hydraulic System
247B and 257B Multi Terrain Loaders Machine Systems Work Tool Hydraulic System
PS-150C Pneumatic Compactor Machine System Water Tank
2004/03/22 Special Instruction, REHS2081 , "Rework Procedure for Relocating The Existing Air Conditioner Condenser" is Available {1805}
C13, C15, and C18 Generator Set Engines Engine Will Not Crank