Feeder Drive Shaft Group - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 9S-3263 | Thread Lock Compound | 1 |
- Use a suitable lifting device in order to position shaft assembly (19), as shown. The weight of the shaft assembly is approximately
55 kg (121 lb) . - Install bolts (10). Do not tighten bolts (10) at this time.
Show/hide table
Illustration 2 g01070394 - Use a suitable pry bar in order to force shaft assembly (19) toward the center of the machine, as shown. Moving the shaft assembly toward the center of the machine is necessary in order to install sprocket (15) on the shaft assembly.
Show/hide table
Illustration 3 g01070448 - Install hose assembly (13) on the shaft assembly.
- Install sprocket (15) on chain (18) and the shaft assembly. Install key (17).
Show/hide table
Illustration 4 g01070447 - Use a suitable pry bar in order to force shaft assembly (19) toward the outside of the machine, as shown.
Show/hide table
Illustration 5 g01070450 - Install bolts (14).
Show/hide table
Illustration 6 g01070229 - Tighten bolts (10).
Show/hide table
Illustration 7 g01070467 - Apply Tooling (A) to the threads of setscrews (16). Install setscrews (16) in sprocket (15).
- Apply Tooling (A) to the threads of bolts (11). Install cap (12) and bolts (11) on the shaft assembly.
Show/hide table
Illustration 8 g01070228 - Connect tube assembly (9) to the shaft assembly.
Show/hide table
Illustration 9 g01070227 - Use a suitable lifting device in order to install plate (8) in the machine. The weight of the plate is approximately
23 kg (51 lb) . Install bolts (7).Show/hide tableIllustration 10 g01070226 - Install plate assembly (5) and bolts (6).
Show/hide table
Illustration 11 g01068798 - Use bolts (3) in order to adjust the tension on the chain. The chain should have
25 ± 5.0 mm (1.0 ± 0.20 inch) of deflection. Tighten bolts (4).Show/hide tableIllustration 12 g01068786 - Install covers (1) and (2).
Show/hide table
Illustration 1 | g01070395 |
End By:
- Remove the wheel (final drive). Refer to Disassembly and Assembly, "Wheel (Final Drive) - Remove and Install".
- Install the drag conveyor. Refer to Disassembly and Assembly, "Drag Conveyor - Remove and Install".
Caterpillar Information System:
AP500F Asphalt Paver Machine Systems Feeder Drive Shaft Group - Assemble
AP555E and BG555E Asphalt Pavers Machine Systems Feeder Drive Shaft Group - Disassemble
AP-655C and BG-2255C Asphalt Pavers Machine Systems Feeder Drive Shaft Group - Remove
PS-150C Pneumatic Compactor Machine System Oscillating and Steering Bar
CB-334E and CB-335E Vibratory Compactors Machine Systems Hydraulic Cylinder (Steering)
PS-150C Pneumatic Compactor Machine System Steering Control
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Work Tool Linkage
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Water Spray Pump Flow - Test
267B, 277B and 287B Multi Terrain Loaders Power Train Piston Pump (Hydrostatic) - Install - 287B Multi Terrain Loader
120H and 135H Motor Graders Air System and Brakes Check Valve (Air Tank)
3408E and 3412E Engines for Caterpillar Built Machines CID 0164 FMI 04 Injector Actuation Pressure voltage low
AP-655C and BG-2255C Asphalt Pavers Machine Systems Control Valve (Hydraulic Generator) - Assemble - AYP1-Up and B9G1-Up
AP555E and BG555E Asphalt Pavers Machine Systems Plates (Drag Pans) - Remove and Install
267B, 277B and 287B Multi Terrain Loaders Power Train Track Tensioner - Remove and Install - 287B Multi Terrain Loader
2004/03/22 An Unknown Diagnostic Fault Code is Displayed on the CAT Electronic Service Tool Display {1901}
R1600G Load Haul Dump Power Train Visual Inspection
CB-334E and CB-335E Vibratory Compactors Machine Systems Fan Hydraulic System
247B and 257B Multi Terrain Loaders Machine Systems Work Tool Hydraulic System
PS-150C Pneumatic Compactor Machine System Water Tank
2004/03/22 Special Instruction, REHS2081 , "Rework Procedure for Relocating The Existing Air Conditioner Condenser" is Available {1805}
C13, C15, and C18 Generator Set Engines Engine Will Not Crank
C13, C15, and C18 Generator Set Engines Intermittent Engine Shutdown
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Piston Pump (Main Hydraulic)
CB-334E and CB-335E Vibratory Compactors Machine Systems Fan System Troubleshooting