Piston Pump (Hydrostatic) - Install - 287B Multi Terrain Loader
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 247-4296 | Handle Assembly | 1 |
| FT-2999 | Weight | 1 | |
| B | 242-6163 | Wrench Adapter | 1 |
| C | 138-7575 | Link Bracket | 1 |
- Attach Tooling (A) to the rear of the piston pump. Install Tooling (C) and a suitable lifting device to Tooling (A) .
Show/hide table
 | |
| Illustration 1 | g01059592 |
- Use Tooling (A), Tooling (C) and a suitable lifting device in order to install piston pump (9). The weight of the piston pump is approximately 86 kg (190 lb). Remove piston pump (9) .
- Use Tooling (B) in order to install bolts (8) .
- Connect hose assemblies (1), (2), (3), (4), (5), (6), and (7) .
Show/hide table
 | |
| Illustration 2 | g01057900 |
End By:
- Install the gear pump. Refer to Disassembly and Assembly, "Gear Pump - Remove and Install".
- Install the hydraulic tank. Refer to Disassembly and Assembly, "Hydraulic Tank - Install ".
Caterpillar Information System:
120H and 135H Motor Graders Air System and Brakes Check Valve (Air Tank)
3408E and 3412E Engines for Caterpillar Built Machines CID 0164 FMI 04 Injector Actuation Pressure voltage low
AP-655C and BG-2255C Asphalt Pavers Machine Systems Control Valve (Hydraulic Generator) - Assemble - AYP1-Up and B9G1-Up
AP-655C and BG-2255C Asphalt Pavers Machine Systems Control Valve (Hydraulic Generator) - Disassemble - AYP1-Up and B9G1-Up
CB-334E and CB-335E Vibratory Compactors Machine Systems Water Spray System Troubleshooting
HF181, HF201, HF202, HF221 and HF222 Felling Heads Felling Head Accumulator Arm - Install - HF221 and HF222
HF181, HF201, HF202, HF221 and HF222 Felling Heads Felling Head Accumulator Arm - Assemble - HF221 and HF222
HF181, HF201, HF202, HF221 and HF222 Felling Heads Felling Head Accumulator Arm - Disassemble - HF221 and HF222
HF181, HF201, HF202, HF221 and HF222 Felling Heads Felling Head Hydraulic Cylinder (Accumulator Arm) - Remove and Install - HF221 and HF222
AP-655C and BG-2255C Asphalt Pavers Machine Systems Control Valve (Hydraulic Generator) - Install - CDG1-Up and CKR1-Up
AP-655C and BG-2255C Asphalt Pavers Machine Systems Control Valve (Hydraulic Generator) - Remove - CDG1-Up and CKR1-Up
C13, C15, and C18 Generator Set Engines Engine Cranks but Will Not Start
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Water Spray Pump Flow - Test
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Work Tool Linkage
PS-150C Pneumatic Compactor Machine System Steering Control
CB-334E and CB-335E Vibratory Compactors Machine Systems Hydraulic Cylinder (Steering)
PS-150C Pneumatic Compactor Machine System Oscillating and Steering Bar
AP-655C and BG-2255C Asphalt Pavers Machine Systems Feeder Drive Shaft Group - Remove
AP555E and BG555E Asphalt Pavers Machine Systems Feeder Drive Shaft Group - Disassemble
AP500F Asphalt Paver Machine Systems Feeder Drive Shaft Group - Assemble
AP-655C and BG-2255C Asphalt Pavers Machine Systems Feeder Drive Shaft Group - Install
AP555E and BG555E Asphalt Pavers Machine Systems Plates (Drag Pans) - Remove and Install
267B, 277B and 287B Multi Terrain Loaders Power Train Track Tensioner - Remove and Install - 287B Multi Terrain Loader
2004/03/22 An Unknown Diagnostic Fault Code is Displayed on the CAT Electronic Service Tool Display {1901}