Plates (Drag Pans) - Remove and Install
Start By:
- Remove the drag conveyor. Refer to Disassembly and Assembly, "Drag Conveyor - Remove and Install".
- Remove the bolts and use a suitable lifting device in order to remove plate (3) from the machine. The weight of the plate is approximately
24 kg (53 lb) . - Remove the bolts and use a suitable lifting device in order to remove plate (2) from the machine. The weight of the plate is approximately
50 kg (110 lb) . - Remove the bolts and use a suitable lifting device in order to remove plate (1) from the machine. The weight of the plate is approximately
50 kg (110 lb) .Show/hide table
Illustration 2 g01058095 - Remove the bolts and use a suitable lifting device in order to remove plate (4) from the machine. The weight of the plate is approximately
23 kg (51 lb) . - Repeat Steps 1 through 4 in order to remove the plates from the opposite side of the machine.
Show/hide table
| |
| Illustration 1 | g01058094 |
- Use a suitable lifting device in order to install plate (4) in the machine. The weight of the plate is approximately
23 kg (51 lb) . Install the bolts.Show/hide table
Illustration 4 g01058094 - Use a suitable lifting device in order to install plate (1) in the machine. The weight of the plate is approximately
50 kg (110 lb) . Install the bolts. - Use a suitable lifting device in order to install plate (2) in the machine. The weight of the plate is approximately
50 kg (110 lb) . Install the bolts. - Use a suitable lifting device in order to install plate (3) in the machine. The weight of the plate is approximately
24 kg (53 lb) . Install the bolts. - Repeat Steps 1 through 4 in order to install the plates on the opposite side of the machine.
Show/hide table
| |
| Illustration 3 | g01058095 |
End By:
- Install the drag conveyor. Refer to Disassembly and Assembly, "Drag Conveyor - Remove and Install".
Caterpillar Information System:
AP-655C and BG-2255C Asphalt Pavers Machine Systems Feeder Drive Shaft Group - Install
AP500F Asphalt Paver Machine Systems Feeder Drive Shaft Group - Assemble
AP555E and BG555E Asphalt Pavers Machine Systems Feeder Drive Shaft Group - Disassemble
AP-655C and BG-2255C Asphalt Pavers Machine Systems Feeder Drive Shaft Group - Remove
PS-150C Pneumatic Compactor Machine System Oscillating and Steering Bar
CB-334E and CB-335E Vibratory Compactors Machine Systems Hydraulic Cylinder (Steering)
PS-150C Pneumatic Compactor Machine System Steering Control
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Work Tool Linkage
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Water Spray Pump Flow - Test
267B, 277B and 287B Multi Terrain Loaders Power Train Piston Pump (Hydrostatic) - Install - 287B Multi Terrain Loader
120H and 135H Motor Graders Air System and Brakes Check Valve (Air Tank)
3408E and 3412E Engines for Caterpillar Built Machines CID 0164 FMI 04 Injector Actuation Pressure voltage low
267B, 277B and 287B Multi Terrain Loaders Power Train Track Tensioner - Remove and Install - 287B Multi Terrain Loader
2004/03/22 An Unknown Diagnostic Fault Code is Displayed on the CAT Electronic Service Tool Display {1901}
R1600G Load Haul Dump Power Train Visual Inspection
CB-334E and CB-335E Vibratory Compactors Machine Systems Fan Hydraulic System
247B and 257B Multi Terrain Loaders Machine Systems Work Tool Hydraulic System
PS-150C Pneumatic Compactor Machine System Water Tank
2004/03/22 Special Instruction, REHS2081 , "Rework Procedure for Relocating The Existing Air Conditioner Condenser" is Available {1805}
C13, C15, and C18 Generator Set Engines Engine Will Not Crank
C13, C15, and C18 Generator Set Engines Intermittent Engine Shutdown
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Piston Pump (Main Hydraulic)
CB-334E and CB-335E Vibratory Compactors Machine Systems Fan System Troubleshooting
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Loader Frame and Rear Frame - Separate