Lifter Group - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 1U-7262     | Telescoping Magnet     | 1     |
Start By:
- Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to remove lifters (1) .
Note: Place an identification mark on the lifters for installation purposes.
Show/hide table
Illustration 1 | g01034177 |
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 1U-7262     | Telescoping Magnet     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Lubricate the lifters with clean engine oil before installing the lifters in the cylinder block.
- Use Tooling (A) to install lifters (1) .
Note: Ensure that the lifters are installed in the original location and that the lifters are seated correctly.
Show/hide table
Illustration 2 | g01034177 |
End By: Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Caterpillar Information System:
3044C Industrial Engine and Engines for Caterpillar Built Machines Cylinder Head - Install
PM820, PM822, and PM825 Cold Planer Engine Valve Lash - Check
143H and 163H Motor Graders Power Train Flushing and Cooling Control Valve - Assemble
3044C Industrial Engine and Engines for Caterpillar Built Machines Cylinder Head - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft - Assemble
988H Wheel Loader Engine Oil and Filter - Change
988H Wheel Loader Engine Oil Level - Check
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
C-9 Engine for the 973C Track-Type Loader Electrical Power Supply Circuit - Test
2003/06/23 An Improved Spin-On Oil Filter {1306, 1308}
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Drum Group (Smooth and Padded)
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Secondary Steering System
Installation Instructions for the 212-5949 Machine Conversion Ar on the IT14G Integrated Toolcarrier{670B, 7000} Installation Instructions for the 212-5949 Machine Conversion Ar on the IT14G Integrated Toolcarrier{670B, 7000}
2003/05/26 New Final Drive for the Propel System {4050, 4800, 5467}
3044C Industrial Engine and Engines for Caterpillar Built Machines Camshaft - Remove and Install
C-9 Engine for the 973C Track-Type Loader E025 High Inlet Air Temperature Derate
3044C Industrial Engine and Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C9 On-highway Engine Water Pump
988H Wheel Loader Cooling System Coolant Level - Check
C-9 Engine for the 973C Track-Type Loader E027 High Inlet Air Temperature Warning
2003/06/16 An Updated Air Tank Improves Serviceability for the Ether Starting Aid Cylinder on Certain Motor Graders {1456, 4272}
TH350B, TH355B, TH360B and TH460B Telehandlers Fire Extinguisher Location
C-9 Engine for the 973C Track-Type Loader Throttle Switch Circuit - Test