CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Caterpillar

Drum Group (Smooth and Padded)

Usage:

CS-533E ASL

Show/hide table




图 1	g01421162
图为带衬垫钢轮的右侧顶视图和光滑钢轮的左侧仰视图。 (2) 排油塞 (3) 注油塞

(1) 将 6V-4876 润滑油涂抹在花键上。将 0.05 L (3.05 in³) 6V-4876 润滑油注入轴腔中。接合轴时标记 "T" 必须垂直对齐。

(4) 将 4C-9506 固定胶涂抹在 36 个螺栓的螺纹上。

(5) 节流孔螺塞组件的扭矩 ... 90 ± 15 N·m (65 ± 11 lb ft)

Caterpillar Information System:

143H and 163H Motor Graders Power Train Flushing and Cooling Control Valve - Disassemble

3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove

3054E Engine for Caterpillar Built Machines Cylinder Head - Remove

3054E Engine for Caterpillar Built Machines Cylinder Head - Install

3044C Industrial Engine and Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install

CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Support and Vibratory Drive

2003/06/09 Charts for the Altitude Deration of Caterpillar Built Machines that are Powered By 3500 EUI and 3500B Engines {1902, 1923}

988H Wheel Loader Engine Oil (High Speed) and Oil Filter - Change - If Equipped

CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Eccentric Weight Shaft Group

2003/07/14 A New Rear View Mirror Improves Operator Visibility {7319}

988H Wheel Loader Engine Mounts - Inspect

3044C Industrial Engine and Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install

2003/06/23 An Improved Spin-On Oil Filter {1306, 1308}

C-9 Engine for the 973C Track-Type Loader Electrical Power Supply Circuit - Test

3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft - Disassemble

988H Wheel Loader Engine Oil Level - Check

988H Wheel Loader Engine Oil and Filter - Change

3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft - Assemble

3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install

3044C Industrial Engine and Engines for Caterpillar Built Machines Cylinder Head - Remove

143H and 163H Motor Graders Power Train Flushing and Cooling Control Valve - Assemble

PM820, PM822, and PM825 Cold Planer Engine Valve Lash - Check

3044C Industrial Engine and Engines for Caterpillar Built Machines Cylinder Head - Install

3044C Industrial Engine and Engines for Caterpillar Built Machines Lifter Group - Remove and Install