Rocker Shaft and Pushrod - Remove
Removal Procedure
Start By:
- Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Loosen each nut and adjustment screw (1) by one rotation.
Show/hide table
Illustration 1 | g01035049 |
- Remove bolts (4) .
- Remove bolts (2) .
- Remove rocker shaft assembly (3) .
- Remove pushrods (5) .
Show/hide table
Illustration 2 | g01035051 |
Caterpillar Information System:
3054E Engine for Caterpillar Built Machines Cylinder Head - Remove
3054E Engine for Caterpillar Built Machines Cylinder Head - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Support and Vibratory Drive
2003/06/09 Charts for the Altitude Deration of Caterpillar Built Machines that are Powered By 3500 EUI and 3500B Engines {1902, 1923}
988H Wheel Loader Engine Oil (High Speed) and Oil Filter - Change - If Equipped
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Eccentric Weight Shaft Group
2003/07/14 A New Rear View Mirror Improves Operator Visibility {7319}
988H Wheel Loader Engine Mounts - Inspect
3044C Industrial Engine and Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install
2003/06/02 Correction to Systems Operation, Testing and Adjusting , "Piston Pump (Steering and Pilot) Margin Pressure - Test and Adjust" {4306, 5070, 5085}
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Vibratory Gauge Group
143H and 163H Motor Graders Power Train Flushing and Cooling Control Valve - Disassemble
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Drum Group (Smooth and Padded)
2003/06/23 An Improved Spin-On Oil Filter {1306, 1308}
C-9 Engine for the 973C Track-Type Loader Electrical Power Supply Circuit - Test
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
988H Wheel Loader Engine Oil Level - Check
988H Wheel Loader Engine Oil and Filter - Change
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft - Assemble
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Cylinder Head - Remove
143H and 163H Motor Graders Power Train Flushing and Cooling Control Valve - Assemble
PM820, PM822, and PM825 Cold Planer Engine Valve Lash - Check