Eccentric Weight Shaft Group
Show/hide table
 | |
| 图 1 | g01000922 |
(1) 接合花键后，将 0.05 L (3.05 in3) 6V-4876 润滑剂 加注到轴腔中。
(2) 将 5P-3413 管密封胶 涂抹在螺塞的螺纹上。
Show/hide table
 | |
| 图 2 | g01001357 |
(3) 将 9S-3263 螺纹锁固胶 涂抹在螺纹上。 螺塞的扭矩 ... 100 ± 5 N·m (74 ± 4 lb ft)
(4) 将 9S-3263 螺纹锁固胶 涂抹在螺纹上。
(5) 将 9S-3263 螺纹锁固胶 涂抹在螺纹上。螺塞的扭矩 ... 100 ± 15 N·m (74 ± 11 lb ft)
钢珠的重量 ... 8.51 kg (18.76 lb)
Caterpillar Information System:
2003/07/14 A New Rear View Mirror Improves Operator Visibility {7319}
988H Wheel Loader Engine Mounts - Inspect
3044C Industrial Engine and Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install
2003/06/02 Correction to Systems Operation, Testing and Adjusting , "Piston Pump (Steering and Pilot) Margin Pressure - Test and Adjust" {4306, 5070, 5085}
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Vibratory Gauge Group
3044C Industrial Engine and Engines for Caterpillar Built Machines Housing (Front) - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Housing (Front) - Remove
2003/07/14 Correction to Specifications , "Control Valve" {5051}
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Eccentric Weight Housing Group
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Vibratory Lines Group
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Machine Systems Cab - Install
988G Wheel Loader Crankshaft Vibration Damper - Inspect
988H Wheel Loader Engine Oil (High Speed) and Oil Filter - Change - If Equipped
2003/06/09 Charts for the Altitude Deration of Caterpillar Built Machines that are Powered By 3500 EUI and 3500B Engines {1902, 1923}
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Support and Vibratory Drive
3044C Industrial Engine and Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3054E Engine for Caterpillar Built Machines Cylinder Head - Install
3054E Engine for Caterpillar Built Machines Cylinder Head - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
143H and 163H Motor Graders Power Train Flushing and Cooling Control Valve - Disassemble
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Drum Group (Smooth and Padded)
2003/06/23 An Improved Spin-On Oil Filter {1306, 1308}
C-9 Engine for the 973C Track-Type Loader Electrical Power Supply Circuit - Test
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft - Disassemble