Crankcase Breather - Remove and Install
Removal Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Loosen clamp (3) and disconnect hose (4). Remove bolts (1). Remove crankcase breather (2) .
Show/hide table
 | |
| Illustration 1 | g01035452 |
Installation Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position crankcase breather (2) and install bolts (1). Connect hose (4) and tighten clamp (3) .
Show/hide table
| | |
| Illustration 2 | g01035452 |
Caterpillar Information System:
2003/06/02 Correction to Systems Operation, Testing and Adjusting , "Piston Pump (Steering and Pilot) Margin Pressure - Test and Adjust" {4306, 5070, 5085}
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Vibratory Gauge Group
3044C Industrial Engine and Engines for Caterpillar Built Machines Housing (Front) - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Housing (Front) - Remove
2003/07/14 Correction to Specifications , "Control Valve" {5051}
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Eccentric Weight Housing Group
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Vibratory Lines Group
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Machine Systems Cab - Install
988G Wheel Loader Crankshaft Vibration Damper - Inspect
M325D MH Material Handler Swing Gear - Lubricate
12H, 140H and 160H Motor Graders Power Train Differential and Bevel Gear - Assemble
12H, 140H and 160H Motor Graders Power Train Differential and Bevel Gear - Disassemble
988H Wheel Loader Engine Mounts - Inspect
2003/07/14 A New Rear View Mirror Improves Operator Visibility {7319}
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Eccentric Weight Shaft Group
988H Wheel Loader Engine Oil (High Speed) and Oil Filter - Change - If Equipped
2003/06/09 Charts for the Altitude Deration of Caterpillar Built Machines that are Powered By 3500 EUI and 3500B Engines {1902, 1923}
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Support and Vibratory Drive
3044C Industrial Engine and Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3054E Engine for Caterpillar Built Machines Cylinder Head - Install
3054E Engine for Caterpillar Built Machines Cylinder Head - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
143H and 163H Motor Graders Power Train Flushing and Cooling Control Valve - Disassemble
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Drum Group (Smooth and Padded)