Rocker Shaft - Disassemble
Disassembly Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1P-1855 | Retaining Ring Pliers | 1 |
Start By:
- Remove the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
- Use Tooling (A) to remove retaining rings (5) .
Show/hide table
 | |
| Illustration 1 | g01035060 |
Show/hide table
 |
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
 |
- Place an identification mark on each of the components for installation purposes.
- Remove rocker arm assembly (4) .
- Remove bracket (3) .
- Remove rocker arm assembly (2) .
- Remove spring (1) .
- Repeat Steps 3 through 6 in order to completely disassemble the rocker shaft assembly.
Caterpillar Information System:
C-9 Engine for the 973C Track-Type Loader Electrical Power Supply Circuit - Test
2003/06/23 An Improved Spin-On Oil Filter {1306, 1308}
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Drum Group (Smooth and Padded)
143H and 163H Motor Graders Power Train Flushing and Cooling Control Valve - Disassemble
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
3054E Engine for Caterpillar Built Machines Cylinder Head - Remove
3054E Engine for Caterpillar Built Machines Cylinder Head - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Support and Vibratory Drive
2003/06/09 Charts for the Altitude Deration of Caterpillar Built Machines that are Powered By 3500 EUI and 3500B Engines {1902, 1923}
988H Wheel Loader Engine Oil (High Speed) and Oil Filter - Change - If Equipped
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Eccentric Weight Shaft Group
988H Wheel Loader Engine Oil Level - Check
988H Wheel Loader Engine Oil and Filter - Change
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft - Assemble
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Cylinder Head - Remove
143H and 163H Motor Graders Power Train Flushing and Cooling Control Valve - Assemble
PM820, PM822, and PM825 Cold Planer Engine Valve Lash - Check
3044C Industrial Engine and Engines for Caterpillar Built Machines Cylinder Head - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Lifter Group - Remove and Install
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Secondary Steering System
Installation Instructions for the 212-5949 Machine Conversion Ar on the IT14G Integrated Toolcarrier{670B, 7000} Installation Instructions for the 212-5949 Machine Conversion Ar on the IT14G Integrated Toolcarrier{670B, 7000}
2003/05/26 New Final Drive for the Propel System {4050, 4800, 5467}