An Updated Air Tank Improves Serviceability for the Ether Starting Aid Cylinder on Certain Motor Graders {1456, 4272}
- Motor Grader:
- 12H (S/N: AMZ1-UP)
- 140H (S/N: CCA1-UP; APM1-UP)
- 143H (S/N: APN1-UP)
- 160H (S/N: ASD1-UP; CCP1-UP)
- 163H (S/N: ARL1-UP)
Description of Change: The location of a port on the air tank has been changed. The new location of the port will allow the removal of the ether starting aid cylinder to be easier.
Adaptable To: The new type of air tank has the same part number as the former air tank.
The updated 209-9985 Air Tank is effective with the following machines: (S/N: AMZ251-UP), (S/N: APM396-UP), (S/N: ASD222-UP), (S/N: APN214-UP), (S/N: ARL256-UP), (S/N: CCA1-UP) and (S/N: CCP1-UP).
The updated air tank is adaptable to the following machines: (S/N: AMZ1-250), (S/N: APM1-395), (S/N: ASD1-221), (S/N: APN1-213) and (S/N: ARL1-255).
Show/hide table
Illustration 1 | g01001519 |
Service Center (1) Previous port location (2) New port location |
Caterpillar Information System:
C-9 Engine for the 973C Track-Type Loader E027 High Inlet Air Temperature Warning
988H Wheel Loader Cooling System Coolant Level - Check
C9 On-highway Engine Water Pump
3044C Industrial Engine and Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C-9 Engine for the 973C Track-Type Loader E025 High Inlet Air Temperature Derate
3044C Industrial Engine and Engines for Caterpillar Built Machines Camshaft - Remove and Install
2003/05/26 New Final Drive for the Propel System {4050, 4800, 5467}
Installation Instructions for the 212-5949 Machine Conversion Ar on the IT14G Integrated Toolcarrier{670B, 7000} Installation Instructions for the 212-5949 Machine Conversion Ar on the IT14G Integrated Toolcarrier{670B, 7000}
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Secondary Steering System
3044C Industrial Engine and Engines for Caterpillar Built Machines Lifter Group - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Cylinder Head - Install
PM820, PM822, and PM825 Cold Planer Engine Valve Lash - Check
TH350B, TH355B, TH360B and TH460B Telehandlers Fire Extinguisher Location
C-9 Engine for the 973C Track-Type Loader Throttle Switch Circuit - Test
980G Wheel Loader Bucket Lower Pivot Bearings - Lubricate
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Metering Pump (Steering)
3044C Engine for Caterpillar Built Machines Camshaft Bearings - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
793C Off-Highway Truck Machine Systems Control Valve (Hoist) - Install
2003/06/23 Special Instruction, REHS1638, "Rework Procedure for the Tube Assembly of the yoke" is Available {7050, 7051}
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet Manifold - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet Manifold - Install
554, 564 and 574B Forwarders Window Washer Reservoir - Fill
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove