Inlet Manifold - Install
Installation Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install gasket (13) and elbow assembly (12). Install bolts (11). Install bracket (10) and bolt (9) .
Show/hide table
 | |
| Illustration 1 | g01035495 |
- Install gasket (3) and position inlet manifold (2). Install bolts (1). Install bolts (4) and (5). Connect the hose assembly and tighten clamp (7). Position crankcase breather (8) and install bolts (6) .
Show/hide table
 | |
| Illustration 2 | g01035474 |
Caterpillar Information System:
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet Manifold - Remove
2003/06/23 Special Instruction, REHS1638, "Rework Procedure for the Tube Assembly of the yoke" is Available {7050, 7051}
793C Off-Highway Truck Machine Systems Control Valve (Hoist) - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
3044C Engine for Caterpillar Built Machines Camshaft Bearings - Remove and Install
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Metering Pump (Steering)
980G Wheel Loader Bucket Lower Pivot Bearings - Lubricate
C-9 Engine for the 973C Track-Type Loader Throttle Switch Circuit - Test
TH350B, TH355B, TH360B and TH460B Telehandlers Fire Extinguisher Location
2003/06/16 An Updated Air Tank Improves Serviceability for the Ether Starting Aid Cylinder on Certain Motor Graders {1456, 4272}
C-9 Engine for the 973C Track-Type Loader E027 High Inlet Air Temperature Warning
988H Wheel Loader Cooling System Coolant Level - Check
554, 564 and 574B Forwarders Window Washer Reservoir - Fill
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
CP-563C and CS-563C Vibratory Compactors Maintenance Interval Schedule
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
834H Wheel Dozer and 836H Landfill Compactor Daily Inspection
2003/07/14 A New Crankshaft Pulley is Available {1205}
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
834H Wheel Dozer and 836H Landfill Compactor Monitoring System
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Connecting Rod Bearings - Install
143H and 163H Motor Graders Power Train Control Valve (All Wheel Drive) - Remove