Inlet Manifold - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
ZZ     | 9U-7087     | Tapered Cap/Plug     | 1     |
9U-7089 | Tapered Cap/Plug     | 1     |
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (6) and position crankcase breather (8) out of the way. Loosen clamp (7) and disconnect the hose assembly. Remove bolts (4) and (5). Remove bolts (1). Remove inlet manifold (2) and gasket (3) .
Show/hide table
Illustration 1 | g01035474 |
- Remove bolt (9) and bracket (10). Remove bolts (11). Remove elbow assembly (12) and gasket (13) .
Show/hide table
Illustration 2 | g01035495 |
Caterpillar Information System:
2003/06/23 Special Instruction, REHS1638, "Rework Procedure for the Tube Assembly of the yoke" is Available {7050, 7051}
793C Off-Highway Truck Machine Systems Control Valve (Hoist) - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
3044C Engine for Caterpillar Built Machines Camshaft Bearings - Remove and Install
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Metering Pump (Steering)
980G Wheel Loader Bucket Lower Pivot Bearings - Lubricate
C-9 Engine for the 973C Track-Type Loader Throttle Switch Circuit - Test
TH350B, TH355B, TH360B and TH460B Telehandlers Fire Extinguisher Location
2003/06/16 An Updated Air Tank Improves Serviceability for the Ether Starting Aid Cylinder on Certain Motor Graders {1456, 4272}
C-9 Engine for the 973C Track-Type Loader E027 High Inlet Air Temperature Warning
988H Wheel Loader Cooling System Coolant Level - Check
C9 On-highway Engine Water Pump
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet Manifold - Install
554, 564 and 574B Forwarders Window Washer Reservoir - Fill
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
CP-563C and CS-563C Vibratory Compactors Maintenance Interval Schedule
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
834H Wheel Dozer and 836H Landfill Compactor Daily Inspection
2003/07/14 A New Crankshaft Pulley is Available {1205}
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
834H Wheel Dozer and 836H Landfill Compactor Monitoring System
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Connecting Rod Bearings - Install