Camshaft Bearings - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 8S-2241     | Camshaft Bearing Tool Group     | 1     |
8H-0684 | Ratchet Wrench     | 1     |
Start By:
- Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to remove the camshaft bearing from the cylinder block.
Show/hide table
Illustration 1 | g01038778 |
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 8S-2241     | Camshaft Bearing Tool Group     | 1     |
8H-0684 | Ratchet Wrench     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Ensure that the bore in the cylinder block for the camshaft bearing is clean and free of debris.
- Use Tooling (A) to install the camshaft bearing in the cylinder block.
Note: Align the oil holes in the camshaft bearing and the cylinder block. The camshaft bearing should be installed to a depth that is flush with the face of the recess in the cylinder block.
Show/hide table
Illustration 2 | g01038778 |
End By: Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Caterpillar Information System:
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Metering Pump (Steering)
980G Wheel Loader Bucket Lower Pivot Bearings - Lubricate
C-9 Engine for the 973C Track-Type Loader Throttle Switch Circuit - Test
TH350B, TH355B, TH360B and TH460B Telehandlers Fire Extinguisher Location
2003/06/16 An Updated Air Tank Improves Serviceability for the Ether Starting Aid Cylinder on Certain Motor Graders {1456, 4272}
C-9 Engine for the 973C Track-Type Loader E027 High Inlet Air Temperature Warning
988H Wheel Loader Cooling System Coolant Level - Check
C9 On-highway Engine Water Pump
3044C Industrial Engine and Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C-9 Engine for the 973C Track-Type Loader E025 High Inlet Air Temperature Derate
3044C Industrial Engine and Engines for Caterpillar Built Machines Camshaft - Remove and Install
2003/05/26 New Final Drive for the Propel System {4050, 4800, 5467}
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
793C Off-Highway Truck Machine Systems Control Valve (Hoist) - Install
2003/06/23 Special Instruction, REHS1638, "Rework Procedure for the Tube Assembly of the yoke" is Available {7050, 7051}
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet Manifold - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet Manifold - Install
554, 564 and 574B Forwarders Window Washer Reservoir - Fill
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
CP-563C and CS-563C Vibratory Compactors Maintenance Interval Schedule
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
834H Wheel Dozer and 836H Landfill Compactor Daily Inspection
2003/07/14 A New Crankshaft Pulley is Available {1205}
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble