New Exhaust Shield Assemblies Are Used on Certain 3408 and 3412 Engines {1107}
- Generator Set:
- 3412 (S/N: 4BZ1-UP)
- Engine:
- 3408 (S/N: 67U1-UP)
- Industrial Engine:
- 3412C IND (S/N: 38S1-UP)
- Marine Engine:
- 3412D MARINE (S/N: REA1-UP)
- 3408B (S/N: 67U1-UP)
- 3408C (S/N: 67U1-UP)
- 3412 (S/N: 38S1-UP)
- 3412C (S/N: DJN1-UP; RLR1-UP; RTY1-UP)
- 3412E (S/N: TGC1-UP)
Description of Change: The new exhaust shield assemblies reduce the heat exposure to the valve cover seals.
Adaptable To: The new 441-1501 Shield As and 437-0294 Shield As are adaptable back to first production of the serial numbers listed above. Refer to Table 2 for the effective serial numbers.
Show/hide table
Required Parts     | |
---|---|
Qty     | Part Number     |
6     | 1B-9575 Bolts     |
6     | 3E-4352 Hard Washers     |
6     | 3L-0593 Spacers     |
1     | 437-0294 Shield As     |
1     | 441-1501 Shield As     |
- Install exhaust shield assembly (1) onto the left-hand side of the engine. Install three spacers (1) under shield (2). Attach the exhaust shield assembly to the valve cover base using three bolts (3) and three washers (4) .
Show/hide table
Illustration 1 | g03438898 |
Left-hand side spacer install (1) 3L-0593 Spacers |
Show/hide table
Illustration 2 | g03438639 |
Left-hand side heat shield install (2) 437-0294 Shield As (3) 1B-9575 Bolts (4) 3E-4352 Hard Washers |
- Install exhaust shield assembly (5) onto the right-hand side of the engine. Install three spacers (1) under heat shield (5). Attach the exhaust shield assembly to the valve cover base using three bolts (3) and three washers (4) .
Show/hide table
Illustration 3 | g03438899 |
Right-hand side spacer install (1) 3L-0593 Spacers |
Show/hide table
Illustration 4 | g03438641 |
Right-hand side heat shield install (3) 1B-9575 Bolts (4) 3E-4352 Hard Washers (5) 441-1501 Shield As |
Show/hide table
Effectivity     |
---|
S/N:RTY04104-UP     |
S/N:TGC01101-UP     |
Caterpillar Information System:
CX31-P600 Petroleum Transmission Transmission Warm-up
PM820, PM822, and PM825 Cold Planer Rotor Drive Belt - Inspect
374F Excavator Counterweight Removal and Installation
C9 Engine Maintenance Interval Schedule
C15 and C18 On-Highway Engines Nozzle Heater Harness - Remove and Install
440-0928 Major Engine Overhaul Foundational Kit for 3512C Engines{1000} 440-0928 Major Engine Overhaul Foundational Kit for 3512C Engines{1000}
374F Excavator Machine Systems Hydraulic System Warm-Up
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Alarm - Test
C15 and C18 On-Highway Engines Exhaust Sensor Lines - Remove and Install - Exhaust Gas Venturi
Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274} Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274}
2013/10/21 Improved Case Assembly is Used on Certain CX31-P600 Petroleum Transmissions {3064}
C4.4 Engines for Caterpillar Built Machines Crankshaft - Spheroidal Graphite Iron (SGI) Crankshaft
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709} 131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Connector Contact Description
PM820, PM822, and PM825 Cold Planer Rotor Drive (Planetary) Oil Sample - Obtain
CX31-P600 Petroleum Transmission Transmission Cooling System
2013/10/02 Improvements for Products and Systems Connected to Product Link {7606}
C9 Marine Engines and C9 Marine Generator Sets Air Starting Motor - Disassemble
Three60 Precision Control System General Information
Retrofit SCR Aftertreatment Aftertreatment Operation
CX31-P600 Petroleum Transmission Lifting and Tying Down the Transmission
794 AC Off-Highway Truck Daily Inspection
CX31-P600 Petroleum Transmission Breather (Transmission) - Clean
C4.4 Engines for Caterpillar Built Machines Main Bearing Journal - Spheroidal Graphite Iron (SGI) Crankshaft