Exhaust Sensor Lines - Remove and Install - Exhaust Gas Venturi
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 207-1601     | 橡胶润滑剂     | 1     |
开始:
- 拆下烟气处理总成。
- 拆下冷却的排气压力传感器。
- 拆下螺栓 (1) 和 (2) ,然后拆下管组件 (5) 。
Show/hide table
图 1 | g03436702 |
- 拆下卡箍 (3) ,然后拆下排气喉管 (4) 。
安装步骤
- 按与拆卸相反的顺序安装排气喉管。
- 将工具 (A) 涂抹到拆下的所有 O 形密封圈上。
- 将卡箍组件 (3) 拧紧至扭矩为 8.5 ± 2 N·m (75 ± 18 lb in)。
Caterpillar Information System:
Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274} Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274}
2013/10/21 Improved Case Assembly is Used on Certain CX31-P600 Petroleum Transmissions {3064}
C4.4 Engines for Caterpillar Built Machines Crankshaft - Spheroidal Graphite Iron (SGI) Crankshaft
440-0842 Major Engine Overhaul Foundational Kit for 3512 Engines{1000} 440-0842 Major Engine Overhaul Foundational Kit for 3512 Engines{1000}
C7.1 Industrial Engine Turbocharger Exhaust Temperature Sensor
2013/09/24 A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
2013/10/31 A New Pump Bracket is Now Used on Certain C12 Marine Engines Equipped with a Bronze Impeller Pump {1371}
2013/10/28 New Engine Software Is Used for Certain C280 Marine Engines {1901, 1920}
349F and 352F Excavators Machine System Specifications Fan Drive Pump
Lubrication Requirements for the 244-1224 Fan Shaft Assembly on Certain 3500 Engines{1353, 1356} Lubrication Requirements for the 244-1224 Fan Shaft Assembly on Certain 3500 Engines{1353, 1356}
440-0216 Major Engine Overhaul Foundational Kit for 3512B and 3512C Engines{1000} 440-0216 Major Engine Overhaul Foundational Kit for 3512B and 3512C Engines{1000}
2015/03/17 The Hydraulic Tank Relief Valve Assembly Has Been Improved on Certain Cat® Machines {4332, 4332, 5056, 5056, 5057, 5118}
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Alarm - Test
374F Excavator Machine Systems Hydraulic System Warm-Up
440-0928 Major Engine Overhaul Foundational Kit for 3512C Engines{1000} 440-0928 Major Engine Overhaul Foundational Kit for 3512C Engines{1000}
C15 and C18 On-Highway Engines Nozzle Heater Harness - Remove and Install
C9 Engine Maintenance Interval Schedule
374F Excavator Counterweight Removal and Installation
PM820, PM822, and PM825 Cold Planer Rotor Drive Belt - Inspect
CX31-P600 Petroleum Transmission Transmission Warm-up
2013/12/23 New Exhaust Shield Assemblies Are Used on Certain 3408 and 3412 Engines {1107}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709} 131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Connector Contact Description
PM820, PM822, and PM825 Cold Planer Rotor Drive (Planetary) Oil Sample - Obtain