Crankshaft - Spheroidal Graphite Iron (SGI) Crankshaft
Show/hide table
| |
| Illustration 1 | g03435603 |
|
Typical Example | |
Show/hide table
| Callout | Quantity | Part | Specification Description |
| 1 | - | Connecting rod bearings | Refer to the Specifications Module, "Connecting Rod Bearing Journal" topic for information on the connecting rod bearings. |
| 2 | - | Thrust washers | Standard thickness Oversize thickness |
| 3 | - | Main bearings | Refer to the Specifications Module, "Main Bearing Journal" topic for information on the Main bearings. |
| 4 | - | Crankshaft gear | Maximum permissible temperature of the gear for installation on the crankshaft The timing mark is toward the outside of the crankshaft when the gear is installed on the crankshaft. |
Note: The SGI crankshaft cannot be reconditioned. If the crankshaft is worn or damaged, the crankshaft must be replaced
Show/hide table
| Callout | Quantity | Part | Specification Description |
| 5 | - | Crankshaft end play | End play of the crankshaft Maximum crankshaft end play |
| 6 | - | Connecting rod journal | Refer to the Specifications Module, "Connecting Rod Bearing Journal" topic for more information on the connecting rod bearing journals and connecting rod bearings. |
| 7 | - | Main bearing journal | Refer to the Specifications Module, "Main Bearing Journal" topic for information on the main bearing journals and for information on the main bearings |
Caterpillar Information System:
440-0842 Major Engine Overhaul Foundational Kit for 3512 Engines{1000} 440-0842 Major Engine Overhaul Foundational Kit for 3512 Engines{1000}
C7.1 Industrial Engine Turbocharger Exhaust Temperature Sensor
2013/09/24 A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
2013/10/31 A New Pump Bracket is Now Used on Certain C12 Marine Engines Equipped with a Bronze Impeller Pump {1371}
2013/10/28 New Engine Software Is Used for Certain C280 Marine Engines {1901, 1920}
349F and 352F Excavators Machine System Specifications Fan Drive Pump
Lubrication Requirements for the 244-1224 Fan Shaft Assembly on Certain 3500 Engines{1353, 1356} Lubrication Requirements for the 244-1224 Fan Shaft Assembly on Certain 3500 Engines{1353, 1356}
440-0216 Major Engine Overhaul Foundational Kit for 3512B and 3512C Engines{1000} 440-0216 Major Engine Overhaul Foundational Kit for 3512B and 3512C Engines{1000}
2015/03/17 The Hydraulic Tank Relief Valve Assembly Has Been Improved on Certain Cat® Machines {4332, 4332, 5056, 5056, 5057, 5118}
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit General Information
440-1753 Major Engine Overhaul Foundational Kit for 3512B Engines{1000} 440-1753 Major Engine Overhaul Foundational Kit for 3512B Engines{1000}
Installation of the 445-2005 Plate for the Accumulator on Certain G3500 and G3500B Engines{5077} Installation of the 445-2005 Plate for the Accumulator on Certain G3500 and G3500B Engines{5077}
2013/10/21 Improved Case Assembly is Used on Certain CX31-P600 Petroleum Transmissions {3064}
Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274} Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274}
C15 and C18 On-Highway Engines Exhaust Sensor Lines - Remove and Install - Exhaust Gas Venturi
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Alarm - Test
374F Excavator Machine Systems Hydraulic System Warm-Up
440-0928 Major Engine Overhaul Foundational Kit for 3512C Engines{1000} 440-0928 Major Engine Overhaul Foundational Kit for 3512C Engines{1000}
C15 and C18 On-Highway Engines Nozzle Heater Harness - Remove and Install
C9 Engine Maintenance Interval Schedule
374F Excavator Counterweight Removal and Installation
PM820, PM822, and PM825 Cold Planer Rotor Drive Belt - Inspect
CX31-P600 Petroleum Transmission Transmission Warm-up
2013/12/23 New Exhaust Shield Assemblies Are Used on Certain 3408 and 3412 Engines {1107}