Nozzle Heater Harness - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 195-4609     | 油封钩     | 1     |
B     | -     | 异丙醇     | -     |
- 断开线束组件 (1) ,然后拆下电缆扎带 (2) 。
Show/hide table
图 1 | g02797790 |
典型示例 |
Show/hide table
图 2 | g02797791 |
典型示例 |
- 拆下六角螺栓 (4) 和卡箍组件。 拆下连接至加热喷嘴(未显示加热喷嘴)的线束组件 (3) 。
注: 实际的加热喷嘴是燃烧盖的组成部分并且不可维修,因此此处没显示加热喷嘴。
- 使用工具 (A) 拆下 O 形密封圈 (5) 和 (6) 。 弃置 O 形密封圈。
Show/hide table
图 3 | g02480016 |
安装步骤
- 按与拆卸相反的顺序安装线束组件 (3) 。
- 安装之前,用工具 (B) 润滑新 O 形密封圈 (5) 和 (6) 。
Show/hide table使用异丙醇时小心从事。 避免长时间皮肤接触异丙基乙醇。
如果吸入蒸汽,可能会导致人身伤害。只能在通风良好的地方使用。使用异丙醇时不要吸烟。
异丙醇易燃。 不要在明火或焊接作业附近使用。使异丙醇远离超过 482°C (900°F) 的加热表面。
注: 该连接是电气连接,而且不能使用石油基润滑剂进行润滑。 异丙醇是适用于此连接的唯一经过认可的润滑剂。
Caterpillar Information System:
440-0928 Major Engine Overhaul Foundational Kit for 3512C Engines{1000} 440-0928 Major Engine Overhaul Foundational Kit for 3512C Engines{1000}
374F Excavator Machine Systems Hydraulic System Warm-Up
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Alarm - Test
C15 and C18 On-Highway Engines Exhaust Sensor Lines - Remove and Install - Exhaust Gas Venturi
Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274} Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274}
2013/10/21 Improved Case Assembly is Used on Certain CX31-P600 Petroleum Transmissions {3064}
C4.4 Engines for Caterpillar Built Machines Crankshaft - Spheroidal Graphite Iron (SGI) Crankshaft
440-0842 Major Engine Overhaul Foundational Kit for 3512 Engines{1000} 440-0842 Major Engine Overhaul Foundational Kit for 3512 Engines{1000}
C7.1 Industrial Engine Turbocharger Exhaust Temperature Sensor
2013/09/24 A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
2013/10/31 A New Pump Bracket is Now Used on Certain C12 Marine Engines Equipped with a Bronze Impeller Pump {1371}
2013/10/28 New Engine Software Is Used for Certain C280 Marine Engines {1901, 1920}
C9 Engine Maintenance Interval Schedule
374F Excavator Counterweight Removal and Installation
PM820, PM822, and PM825 Cold Planer Rotor Drive Belt - Inspect
CX31-P600 Petroleum Transmission Transmission Warm-up
2013/12/23 New Exhaust Shield Assemblies Are Used on Certain 3408 and 3412 Engines {1107}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709} 131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Connector Contact Description
PM820, PM822, and PM825 Cold Planer Rotor Drive (Planetary) Oil Sample - Obtain
CX31-P600 Petroleum Transmission Transmission Cooling System
2013/10/02 Improvements for Products and Systems Connected to Product Link {7606}
C9 Marine Engines and C9 Marine Generator Sets Air Starting Motor - Disassemble
Three60 Precision Control System General Information