Air Starting Motor - Disassemble
- Remove deflector assembly (1), bolts (4), inlet cover (3), gasket (2), and housing (5).
Show/hide table
Personal injury can result from parts and/or covers under spring pressure.
Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
Show/hide table
Illustration 2 g03439204 - Remove bolts (7), housing (6), spring (8), piston (9), and clutch assembly (10).
Show/hide table
Illustration 3 g03439383 - Remove retainer (11), pinion (12), spacer (13), washer (14), gear housing (15), and spacer (16).
Show/hide table
| |
| Illustration 1 | g03438956 |
Caterpillar Information System:
2013/10/02 Improvements for Products and Systems Connected to Product Link {7606}
CX31-P600 Petroleum Transmission Transmission Cooling System
PM820, PM822, and PM825 Cold Planer Rotor Drive (Planetary) Oil Sample - Obtain
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Connector Contact Description
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709} 131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
2013/12/23 New Exhaust Shield Assemblies Are Used on Certain 3408 and 3412 Engines {1107}
CX31-P600 Petroleum Transmission Transmission Warm-up
PM820, PM822, and PM825 Cold Planer Rotor Drive Belt - Inspect
374F Excavator Counterweight Removal and Installation
C9 Engine Maintenance Interval Schedule
C15 and C18 On-Highway Engines Nozzle Heater Harness - Remove and Install
440-0928 Major Engine Overhaul Foundational Kit for 3512C Engines{1000} 440-0928 Major Engine Overhaul Foundational Kit for 3512C Engines{1000}
Three60 Precision Control System General Information
Retrofit SCR Aftertreatment Aftertreatment Operation
CX31-P600 Petroleum Transmission Lifting and Tying Down the Transmission
794 AC Off-Highway Truck Daily Inspection
CX31-P600 Petroleum Transmission Breather (Transmission) - Clean
C4.4 Engines for Caterpillar Built Machines Main Bearing Journal - Spheroidal Graphite Iron (SGI) Crankshaft
C4.4 Engines for Caterpillar Built Machines Connecting Rod - For Use With Spheroidal Graphite Iron (SGI) Crankshaft
CX31-P600 Petroleum Transmission Magnetic Screen (Transmission) - Clean - Standard
2013/10/09 New Sensor Routing on Certain 3412 and 3412C Engines {1408, 7451}
CX31-P600 Petroleum Transmission Magnetic Screen (Output Transfer Gears) - Clean
794 AC Off-Highway Truck Lowering the Body with Engine Stopped
CX31-P600 Petroleum Transmission Oil Filter (Output Transfer Gears) - Replace