Bottom Guard - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 180-3034     | Jack Stand Gp     | 2     |
B     | 1U-7505     | Hydraulic Jack     | 1     |
- Use Tooling (B) in order to position rear bottom guards (9) and (11) on the machine. The combined weight of rear bottom guards (9) and (11) is approximately 60 kg (132 lb).
Show/hide table
Illustration 1 | g01302279 |
- Install the washers and bolts (10) to rear bottom guards (9) and (11) .
- Install the washers and bolts (8) to rear bottom guards (9) .
Show/hide table
Illustration 2 | g01302260 |
- Use Tooling (B) in order to position center bottom guard (6) on the machine. The weight of center bottom guard (6) is approximately 42 kg (92 lb).
Show/hide table
Illustration 3 | g01302170 |
- Install the washers and bolts (7) to center bottom guard (6) .
- Repeat Steps 4 and 5 in order to install center bottom guard (5) to the machine.
- Install the washers and bolts (4) to center bottom guards (5) and (6) .
Show/hide table
Illustration 4 | g01302166 |
- Use Tooling (B) in order to position front bottom guard (2) to the machine. The weight of front bottom guard (2) is approximately 74 kg (163 lb). Install the washers and the bolts (3) to front bottom guard (2) .
Show/hide table
Illustration 5 | g01302158 |
- Remove Tooling (A) under blade (1) .
Show/hide table
Illustration 6 | g01302152 |
Caterpillar Information System:
657G Wheel Tractor-Scraper Wheel Tractor Power Train Scavenge Pump and Mounting (Flywheel) - Remove
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove - Connecting rods in position
Installation Instructions for the 290-3531 Ride Control Ar (KIT){5004} Installation Instructions for the 290-3531 Ride Control Ar (KIT){5004}
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft - Disassemble
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Mounting and Dismounting
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft - Assemble
D6K Track-Type Tractor Machine Systems Bottom Guard - Remove
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator - Remove and Install - 65 Amp and 85 Amp Alternators
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator - Remove and Install - 55 Amp Alternator
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System System Schematic
C-9 Engine for D6R Series II Track-Type Tractor CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C-9 Engine for D6R Series II Track-Type Tractor CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install - Turbocharged Engines
Installation of 6SU (S/N: D1Y; S6A; ECA; S6D; JCE; S6S; B6D; B6A) Bulldozer{6050} Installation of 6SU (S/N: D1Y; S6A; ECA; S6D; JCE; S6S; B6D; B6A) Bulldozer{6050}
657G Wheel Tractor-Scraper Wheel Tractor Power Train Drive Shaft - Remove
C11 and C13 Engines and 14M and 16M Motor Graders CAN Data Link - Test
2006/09/18 A New Alternator Support and a New Belt are Used {1397, 1405}
D6G Series II Track-Type Tractor Machine Systems Bulldozer Brace - Remove and Install
D6K Track-Type Tractor Electrohydraulic Power Train Track Roller Frame
C9 Engines for Motor Graders Fuel Filter Differential Pressure - Test
C11 and C13 Engines and 14M and 16M Motor Graders Fuel Filter Is Restricted
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290} Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
C11 and C13 Engines and 14M and 16M Motor Graders Fuel Transfer Pump - Test
Location and Adjusting Procedure for the Bucket Stops {6001, 6107, 6119, 6129} Location and Adjusting Procedure for the Bucket Stops {6001, 6107, 6119, 6129}