Water Temperature Regulator Housing - Remove and Install
Show/hide table
| 注意 |
|---|
|
在进行检验、保养、测试、调整及维修产品期间，必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前，要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品，请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 排空冷却系统。 请参考操作和保养手册, "冷却系统冷却液 - 更换"。
Show/hide table
图 1 g01115570 - 断开管路组件 (1)。
- 拆卸螺栓 (3)。
- 卸下水温调节器壳体 (2) 和 O 形密封圈。
- 从水温调节器壳体 (2) 上卸下唇形密封。
Show/hide table
| 需要的工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件名称 | 数量 |
| A | 221-8647 | 密封件安装工具总成 | 1 |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (A)，将唇形密封安装到水温调节器壳体 (2) 中。
- 安装 O 形密封圈和水温调节器壳体 (2)。
- 安装螺栓 (3)。
- 连接管路组件 (1)。
- 加注冷却系统。 请参考操作和保养手册, "冷却系统冷却液 - 更换"。
Show/hide table
| |
| 图 2 | g01115570 |
Caterpillar Information System:
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Intermittent Engine Shutdown
2004/01/01 A Special Instruction, REHS2060 , "Installation Instructions for the 240-0717 Engine Oil Lines Gp for the Hydraulic Electronic Unit Injector (HEUI) Pump" is Available {1307, 1714}
2006/06/26 Some Pistons and Cylinder Packs are Cancelled and Replaced {1214}
2004/05/03 New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738}
C18 Marine Auxiliary Engines Engine Pressure Sensor Open or Short Circuit - Test
G3500 Engines Diagnostic Reset Switch
2004/01/26 A New Spring for the Oil Filter Bypass Valve and for the Oil Cooler Bypass Valve is Now in Production {1306, 1314, 1318, 1378}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers ECM Will Not Communicate with Other Systems or Display Modules
C15 and C18 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
C18 Marine Generator Set Engines Engine Temperature Sensor Open or Short Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines Engine Support (Front) - Remove and Install
C18 Marine Auxiliary Engines Switch Circuits - Test
C9 Marine Auxiliary and Marine Generator Set Engines Low Power/Poor or No Response to Throttle
Install the Correct Piston Cooling Jet and the Correct Retainer for the One-Piece Piston{1214, 1331} Install the Correct Piston Cooling Jet and the Correct Retainer for the One-Piece Piston{1214, 1331}
C27 and C32 Generator Set Engines CID 0091 FMI 08 Throttle Position signal abnormal
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Remove
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Install
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Assemble
3126B Industrial Engine Electronic Control Module - Remove and Install
C18 Marine Auxiliary Engines Event Codes
C18 Marine Auxiliary Engines Diagnostic Codes
G3500 Engines Control Module Self Test
2004/01/01 A New Spring for the Oil Filter Bypass Valve and for the Oil Cooler Bypass Valve is Now in Production {1306, 1314, 1318, 1378}