A Special Instruction, REHS2060 , "Installation Instructions for the 240-0717 Engine Oil Lines Gp for the Hydraulic Electronic Unit Injector (HEUI) Pump" is Available {1307, 1714}
- Truck Engines:
- 3126B (S/N: BKD1-UP; 1AJ1-UP; 5GL1-UP; 8YL1-UP; 7AS1-UP; 8SZ1-UP)
- 3126E (S/N: DPF1-UP; 6ZG1-UP; CKM1-UP; CRP1-UP; 9SZ1-UP)
The special instruction contains information for installing the 240-0717 Engine Oil Lines Gp. The 240-0717 Engine Oil Lines Gp is available for repair of the high pressure oil line on the Hydraulic Electronic Unit Injector Pump. The kit is used in order to replace the flexible high pressure oil line with a more durable steel line.
The 240-0717 Engine Oil Lines Gp is adaptable to the engines that are listed above.
The Special Instruction is available through the normal literature distribution system. The publication can also be found on the Caterpillar Service Information System (SIS).
Caterpillar Information System:
2006/06/26 Some Pistons and Cylinder Packs are Cancelled and Replaced {1214}
2004/05/03 New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738}
C18 Marine Auxiliary Engines Engine Pressure Sensor Open or Short Circuit - Test
G3500 Engines Diagnostic Reset Switch
2004/01/26 A New Spring for the Oil Filter Bypass Valve and for the Oil Cooler Bypass Valve is Now in Production {1306, 1314, 1318, 1378}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers ECM Will Not Communicate with Other Systems or Display Modules
C15 and C18 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
C18 Marine Generator Set Engines Engine Temperature Sensor Open or Short Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines Engine Support (Front) - Remove and Install
C18 Marine Auxiliary Engines Switch Circuits - Test
C18 Marine Auxiliary Engines Analog Sensor Supply Circuit - Test
2004/02/01 Improved Software Has Been Released For The C7 On-Highway Truck Engine {7620}
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Intermittent Engine Shutdown
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
C9 Marine Auxiliary and Marine Generator Set Engines Low Power/Poor or No Response to Throttle
Install the Correct Piston Cooling Jet and the Correct Retainer for the One-Piece Piston{1214, 1331} Install the Correct Piston Cooling Jet and the Correct Retainer for the One-Piece Piston{1214, 1331}
C27 and C32 Generator Set Engines CID 0091 FMI 08 Throttle Position signal abnormal
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Remove
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Install
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Assemble
3126B Industrial Engine Electronic Control Module - Remove and Install
C18 Marine Auxiliary Engines Event Codes
C18 Marine Auxiliary Engines Diagnostic Codes