Exhaust Manifold
Show/hide table
Illustration 1 | g01448051 |
In a numerical sequence, tighten nuts 1 through 12.
Torque for nuts ...
Show/hide table
Illustration 2 | g01448052 |
Rear view of engine |
(13) Apply 5P-3931 Anti-Seize Compound on the stud threads before assembly. Tighten the studs to the following torque. ...
(14) Torque for bolts ...
Caterpillar Information System:
C32 Marine Engine Aftercooler
G3500 Engines Manifold Air Pressure Sensor
C9 Marine Engines and C9 Marine Generator Sets Lifter Group - Remove and Install
C9 Marine Engines and C9 Marine Generator Sets Rocker Arm - Assemble
C9 Marine Engines and C9 Marine Generator Sets Rocker Arm - Disassemble
G3500 Engines Temperature Switch
C27 and C32 Tier 4 Final Marine Engines Turbocharger
G3500 Engines Temperature Switch
C32 Marine Engine Valve Mechanism Cover
G3500 Engines Engine Oil Pressure (Low)
C9 Marine Engines and C9 Marine Generator Sets Rocker Arm and Shaft - Install
C9 Marine Engines and C9 Marine Generator Sets Rocker Arm and Shaft - Remove
3406E Marine Engine Gear Group (Front) - Install
2003/11/01 Improved Gasket for the Exhaust Elbow {1059}
C9 Engine For Caterpillar Built Machines Camshaft - Remove
C9 Engines for Caterpillar Built Machines Camshaft - Install
C9 Marine Engines and C9 Marine Generator Sets Camshaft Bearings - Remove and Install
G3500 Engines Pressure Sensor
G3500 Engines Oxygen Sensor
C32 Marine Engine Engine Oil Pan
G3500 Engines Pressure Sensor
G3500 Engines Engine Starts but Stalls Immediately
G3500 Engines Engine Timing Does Not Match Programmed Timing
G3500 Engines Engine Will Not Crank