G3500 Engines Caterpillar

Pressure Sensor

Usage:

G3508 2TJ

Show/hide table




Illustration 1	g01032507

(1) Nut

The sensor should be installed vertical within a range of ± 90°. The port must be in a downward position.

Torque ... 45 ± 5 N·m (33 ± 4 lb ft)

Maximum operating pressure (absolute pressure) ... 340 kPa (50 psi)

Supply voltage ... 8 to 32 VDC

Maximum supply current ... 35 mA

Operating temperature ... −40 to 110 °C (−40 to 230 °F)

Caterpillar Information System:

C32 Marine Engine Engine Oil Pan

G3500 Engines Oxygen Sensor

G3500 Engines Pressure Sensor

C9 Marine Engines and C9 Marine Generator Sets Camshaft Bearings - Remove and Install

C9 Engines for Caterpillar Built Machines Camshaft - Install

C9 Engine For Caterpillar Built Machines Camshaft - Remove

2003/11/01 Improved Gasket for the Exhaust Elbow {1059}

3406E Marine Engine Gear Group (Front) - Install

C32 Marine Engine Exhaust Manifold

C32 Marine Engine Aftercooler

G3500 Engines Manifold Air Pressure Sensor

C9 Marine Engines and C9 Marine Generator Sets Lifter Group - Remove and Install

G3500 Engines Engine Starts but Stalls Immediately

G3500 Engines Engine Timing Does Not Match Programmed Timing

G3500 Engines Engine Will Not Crank

G3500 Engines Excessive Engine Oil Consumption

G3500 Engines Exhaust Port Temperature (High)

G3500 Engines Fuel Metering Valve

G3500 Engines Inlet Air Temperature (High)

G3500 Engines Intermittent Engine Shutdown

G3500 Engines Low Power/Poor or No Response to Throttle

C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Mechanical Noise (Knock) in Engine

2003/11/01 New Gasket for the Turbocharger's Water Lines {1052, 1380}

G3500 Engines Noise Coming from Cylinder