C9 Marine Engines and C9 Marine Generator Sets Caterpillar


Lifter Group - Remove and Install

Usage:

C9 C9A

Removal Procedure

Start By:

  1. Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove".


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g01141708

  1. Remove valve lifter (1) from the cylinder block.

  2. Put identification marks on the valve lifter for installation purposes.

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
8T-2998  Lubricant 


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 2g01141708

  1. Lubricate the camshaft lobe and the valve lifter bore with a 50/50 mixture of Tooling (A) and clean engine oil.

  2. Install valve lifter (1) in the original location in the cylinder block.

End By:

  1. Install the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head- Install".
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.