Camshaft - Remove
拆卸步骤
Show/hide table
需要的工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | FT-2730     | 挂钩     | 12     |
开始:
- 拆下摇臂和摇臂轴。 请参阅解体和组装, "摇臂和摇臂轴 - 拆卸"。
- 拆下前盖。 请参阅解体和组装, "前盖 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (A) ,重新定位气门挺杆,离开凸轮轴。
- 设定 1 号活塞压缩冲程的上止点位置。 请参阅测试和调整, "确定 1 号活塞上止点位置"。
- 确保对齐凸轮轴齿轮 (1) 与惰轮齿轮 (2) 上的正时标记。
Show/hide table
图 1 | g01032348 |
- 从缸体上拆下螺栓 (3) 和止推板 (4) 。
- 从缸体上拆下凸轮轴 (5) 。
Show/hide table
图 2 | g01032349 |
Show/hide table
注意 |
---|
拆卸或安装凸轮轴时不要损坏凸轮或轴承。 |
Caterpillar Information System:
2003/11/01 Improved Gasket for the Exhaust Elbow {1059}
3406E Marine Engine Gear Group (Front) - Install
C32 Marine Engine Exhaust Manifold
C32 Marine Engine Aftercooler
G3500 Engines Manifold Air Pressure Sensor
C9 Marine Engines and C9 Marine Generator Sets Lifter Group - Remove and Install
C9 Marine Engines and C9 Marine Generator Sets Rocker Arm - Assemble
C9 Marine Engines and C9 Marine Generator Sets Rocker Arm - Disassemble
G3500 Engines Temperature Switch
C27 and C32 Tier 4 Final Marine Engines Turbocharger
G3500 Engines Temperature Switch
C32 Marine Engine Valve Mechanism Cover
C9 Engines for Caterpillar Built Machines Camshaft - Install
C9 Marine Engines and C9 Marine Generator Sets Camshaft Bearings - Remove and Install
G3500 Engines Pressure Sensor
G3500 Engines Oxygen Sensor
C32 Marine Engine Engine Oil Pan
G3500 Engines Pressure Sensor
G3500 Engines Engine Starts but Stalls Immediately
G3500 Engines Engine Timing Does Not Match Programmed Timing
G3500 Engines Engine Will Not Crank
G3500 Engines Excessive Engine Oil Consumption
G3500 Engines Exhaust Port Temperature (High)
G3500 Engines Fuel Metering Valve