Rocker Arm - Assemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1P-1855 | Retaining Ring Pliers | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Lubricate all components of the rocker shaft with clean engine oil.
Show/hide table
Illustration 1 g01145945 - Install inlet rocker arm (2), spring (3), exhaust rocker arm (4), and stand (5) on rocker arm shaft (1).
- Use Tooling (A) to install retaining ring (6).
End By:
- Install the rocker arm and shaft. Refer to Disassembly and Assembly, "Rocker Arm and Shaft - Install".
Caterpillar Information System:
C9 Marine Engines and C9 Marine Generator Sets Rocker Arm - Disassemble
G3500 Engines Temperature Switch
C27 and C32 Tier 4 Final Marine Engines Turbocharger
G3500 Engines Temperature Switch
C32 Marine Engine Valve Mechanism Cover
G3500 Engines Engine Oil Pressure (Low)
C9 Marine Engines and C9 Marine Generator Sets Rocker Arm and Shaft - Install
C9 Marine Engines and C9 Marine Generator Sets Rocker Arm and Shaft - Remove
G3500 Engines Engine Oil in Cooling System
G3500 Engines Engine Misfires, Runs Rough or Is Unstable
G3500 Engines Engine Has Early Wear
G3500 Engines Engine Cranks but Will Not Start
C9 Marine Engines and C9 Marine Generator Sets Lifter Group - Remove and Install
G3500 Engines Manifold Air Pressure Sensor
C32 Marine Engine Aftercooler
C32 Marine Engine Exhaust Manifold
3406E Marine Engine Gear Group (Front) - Install
2003/11/01 Improved Gasket for the Exhaust Elbow {1059}
C9 Engine For Caterpillar Built Machines Camshaft - Remove
C9 Engines for Caterpillar Built Machines Camshaft - Install
C9 Marine Engines and C9 Marine Generator Sets Camshaft Bearings - Remove and Install
G3500 Engines Pressure Sensor
G3500 Engines Oxygen Sensor
C32 Marine Engine Engine Oil Pan