Engine Oil Pan
Show/hide table
Illustration 1 | g01443459 |
Left side view |
Show/hide table
Illustration 2 | g01443460 |
Right side view |
(1) Lubricate the plug with oil. Tighten the plug to the following torque. ...
(2) Lubricate the bore for the seal lightly with engine oil or with glycerin.
Caterpillar Information System:
G3500 Engines Oxygen Sensor
G3500 Engines Pressure Sensor
C9 Marine Engines and C9 Marine Generator Sets Camshaft Bearings - Remove and Install
C9 Engines for Caterpillar Built Machines Camshaft - Install
C9 Engine For Caterpillar Built Machines Camshaft - Remove
2003/11/01 Improved Gasket for the Exhaust Elbow {1059}
3406E Marine Engine Gear Group (Front) - Install
C32 Marine Engine Exhaust Manifold
C32 Marine Engine Aftercooler
G3500 Engines Manifold Air Pressure Sensor
C9 Marine Engines and C9 Marine Generator Sets Lifter Group - Remove and Install
C9 Marine Engines and C9 Marine Generator Sets Rocker Arm - Assemble
G3500 Engines Pressure Sensor
G3500 Engines Engine Starts but Stalls Immediately
G3500 Engines Engine Timing Does Not Match Programmed Timing
G3500 Engines Engine Will Not Crank
G3500 Engines Excessive Engine Oil Consumption
G3500 Engines Exhaust Port Temperature (High)
G3500 Engines Fuel Metering Valve
G3500 Engines Inlet Air Temperature (High)
G3500 Engines Intermittent Engine Shutdown
G3500 Engines Low Power/Poor or No Response to Throttle
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Mechanical Noise (Knock) in Engine
2003/11/01 New Gasket for the Turbocharger's Water Lines {1052, 1380}