Improved Pump Drive Gear for an Auxiliary Sea Water Pump {1242}
- Engine:
- 3508B (S/N: 2BM1-UP)
- 3512 (S/N: 3YF1-UP; 3RS1-UP; 50Y1-UP)
- 3512B (S/N: S2G1-UP; S2H1-UP; S2J1-UP; S2K1-UP; S2L1-UP; 7HM1-UP; 8EM1-UP; 8RM1-UP; BRN1-UP; S2N1-UP; 4TN1-UP; 6WN1-UP; BMS1-UP; 2GW1-UP; 2EZ1-UP; 1GZ1-UP)
- 3516 (S/N: 4XF1-UP; 4MJ1-UP; 5MJ1-UP; 3SS1-UP; 29Z1-UP)
- 3516B (S/N: CDE1-UP; BLH1-UP; FDN1-UP; 6HN1-UP; 7RN1-UP; 8KN1-UP; 9AN1-UP; S2P1-UP; S2R1-UP; S2S1-UP; S2T1-UP; S2W1-UP; 3CW1-UP; 4BW1-UP; S2X1-UP; 1HZ1-UP)
Description of Change: A new pump drive gear is used in the 9Y-5710 Auxiliary Sea Water Pump Group. The new pump drive gear has a larger shaft diameter for increased strength.
Adaptable To: The new 239-5790 Pump Drive Gear is a direct replacement for the 122-3205 Pump Drive Gear. Eight new 0S-1588 Bolts and eight new 8M-3175 Hard Washers are required when you install the new pump drive gear.
Show/hide table
Illustration 1 | g01018647 |
(1) Bolts and hard washers (2) Pump drive gear |
Show/hide table
Illustration 2 | g01022717 |
(2) Pump drive gear |
Caterpillar Information System:
C11 and C13 Engines for Caterpillar Built Machines Front Cover - Install
C15 and C18 Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
2003/08/01 An Improved Stub Shaft is Used for Engines with Dual Vibration Dampers {1237, 5569}
C11 and C13 Engines for Caterpillar Built Machines Front Cover - Remove
G3520C and G3520E Generator Set Engines Component Location
C11 and C13 Engines for Caterpillar Built Machines Gear Group (Front) - Install
3512C and 3516C Marine Auxiliary and Generator Set Engines Gas Pressure Regulator Condensation - Drain
C11 and C13 Engines for Caterpillar Built Machines Gear Group (Front) - Remove
C11 and C13 Engines Valve Actuator (Variable) - Install
C11 and C13 Engines Valve Actuator (Variable) - Remove
C9 On-highway Engines California Emission Control Warranty Statement
2004/03/01 SOLAS Requirements For Oil Lines {1307}
Customer Interface for the 3512B Well Fracturing Engine (ADEM II){1408} Customer Interface for the 3512B Well Fracturing Engine (ADEM II){1408}
C11 and C13 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
G3406 Engines Engine Oil Pan
2004/04/01 New Rocker Arm Improves Lubrication {1123}
Cat® Digital Voltage Regulator Wiring Diagrams
G3406 Engines Engine Oil Pan
C11 and C13 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
G3406 Engines Engine Oil Pan
2003/08/04 There Is a New Maximum Temperature for 2W-8147 Gear {1204}
2003/10/01 Fuel Transfer System for Power Modules {1256}
2003/09/01 There Is a New Maximum Temperature for 2W-8147 Gear {1204}
G3520C and G3520E Generator Set Engines Air/Fuel Ratio Control