C11 and C13 Engines Caterpillar


Valve Actuator (Variable) - Remove

Usage:

C13 JAM

拆卸步骤

开始:

  1. 拆下气门机构盖。 请参阅拆解和组装, "气门机构盖 - 拆卸和安装"。



    图 1g01315836

  1. 断开线束组件 (1) 和 (4) 。

  1. 拆卸螺母 (2) 、螺栓 (3) 和气门执行器(可变) (5) 。

Caterpillar Information System:

C9 On-highway Engines California Emission Control Warranty Statement
2004/03/01 SOLAS Requirements For Oil Lines {1307}
C9 On-highway Engines Federal Emission Control Warranty
G3500B Engines Fuel Metering Valve - Check - Raptor
2003/08/01 Update Caterpillar Electronic Technician (Cat ET) to the Newest Version {0785}
G3500B Engines Engine Protective Devices - Check
C-15 On-Highway Engine Fuel Recirculation Valve - Remove and Install
G3500B Engines Engine Crankcase Breather - Clean
C11 and C13 Engines Precooler - Install
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Block
C11 and C13 Engines Precooler - Remove
G3406 Engines Camshaft
C11 and C13 Engines Valve Actuator (Variable) - Install
C11 and C13 Engines for Caterpillar Built Machines Gear Group (Front) - Remove
3512C and 3516C Marine Auxiliary and Generator Set Engines Gas Pressure Regulator Condensation - Drain
C11 and C13 Engines for Caterpillar Built Machines Gear Group (Front) - Install
G3520C and G3520E Generator Set Engines Component Location
C11 and C13 Engines for Caterpillar Built Machines Front Cover - Remove
2003/08/01 An Improved Stub Shaft is Used for Engines with Dual Vibration Dampers {1237, 5569}
C15 and C18 Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines Front Cover - Install
2003/09/01 Improved Pump Drive Gear for an Auxiliary Sea Water Pump {1242}
Customer Interface for the 3512B Well Fracturing Engine (ADEM II){1408} Customer Interface for the 3512B Well Fracturing Engine (ADEM II){1408}
C11 and C13 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.